Giljr2 Posted May 20, 2015 Report Share Posted May 20, 2015 I was wanting to replace my front drums to disk breaks and soon also ad rear disck but do I have to buy these expensive $600+ kits? Or is it all just about buy a braket for the truck? I really want to see what I can do. 1 Quote Link to comment
flatcat19 Posted May 20, 2015 Report Share Posted May 20, 2015 The $600 lot you see on eBay is everything you will need short a master cylinder. Other brackets are out there, but you will still need to buy everything else 1 Quote Link to comment
datzenmike Posted May 21, 2015 Report Share Posted May 21, 2015 The search function is the best way to source this information. This is an extremely popular brake improvement for the 620 and is well documented here. Type ' 620 disc brakes on early 620' or '620 disc brake conversion' or 'BEEBANI's disc brake conversion' or try mixing up the words for alternate replies. Next try searching through the Brakes forum or build projects. All it takes is one post to point you in the right direction. 1 Quote Link to comment
flatcat19 Posted May 21, 2015 Report Share Posted May 21, 2015 Hell, the pinned topic, aptly titled, READ THIS FIRST in the general discussion sub-forum covers disc brake swaps to trucks. 1 Quote Link to comment
Charlie69 Posted May 21, 2015 Report Share Posted May 21, 2015 Beebani and Mike Klotz make brackets for the conversion. I used Mike Klotz's kit on my 520 and was impressed with the Research and Development that Mike put into the kits. Mike Klotz's 520 521 kit Beebanis Kit 1 Quote Link to comment
Giljr2 Posted May 21, 2015 Author Report Share Posted May 21, 2015 Beebani and Mike Klotz make brackets for the conversion. I used Mike Klotz's kit on my 520 and was impressed with the Research and Development that Mike put into the kits. Mike Klotz's 520 521 kit Beebanis Kit Would Mike Klotz's kit fit on my 620? 1 Quote Link to comment
flatcat19 Posted May 22, 2015 Report Share Posted May 22, 2015 Would Mike Klotz's kit fit on my 620? Yes. www.bluehandsinc.com is Mike's website. Really trick stuff. Lots of effort went into every part he supplies. 1 Quote Link to comment
Charlie69 Posted May 22, 2015 Report Share Posted May 22, 2015 Mikes thread on installing on a 521. http://community.ratsun.net/topic/54486-disc-brake-kit-install-mklotz70/ Mike is a super nice person and is very capable of answering your questions. Be patient though he is a very busy man. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.