71Hustler Posted May 10, 2015 Report Share Posted May 10, 2015 Well, since I didn't have enough trouble on my hands already, I purchased this little gal a few days ago. Someone on Ratsun said "the time to buy it is when you see it," so that's my excuse.1969 Wagon with an LZ22 (I was told, but this conflicts with the notes). The head is an A-87 (that's from a L20b, correct? I'll probably have questions about this later). 5 speed transmission. So, probably the most encouraging for me was the availability of the previous owner's notes from 1994-2003. Granted, I bought it directly from someone flipping it, but the original owner had apparently built it up for his wife (or daughter, not entirely clear). I dug around a bit, and turns out his name was Charles Smith, former Datsun 510 club member, recently deceased. Anyone happen to know Charles? Now that I've got "Irish twins" so to speak, I'll need to figure out what my master plan is for both. 4 Quote Link to comment
mrbigtanker Posted May 10, 2015 Report Share Posted May 10, 2015 Very nice get some more pics of it. I got one my self, what a money pit, but there fun as hell 2 Quote Link to comment
Lockleaf Posted May 11, 2015 Report Share Posted May 11, 2015 That's a nice looking wagon. Keep the pics coming. 2 Quote Link to comment
edekalil Posted May 11, 2015 Report Share Posted May 11, 2015 Looks good, love it. 1 Quote Link to comment
Draker Posted May 11, 2015 Report Share Posted May 11, 2015 I knew Chuck. I checked out this wagon when he owned it. 1 Quote Link to comment
mklotz70 Posted May 17, 2015 Report Share Posted May 17, 2015 Great wagon! Congrats. :) Quote Link to comment
datzenmike Posted May 17, 2015 Report Share Posted May 17, 2015 Look on the top of the block where it meets the head, directly behind the dip stick handle. If it's an L series engine it will say L16, L18 or L20B. If it does not have the engine size stamped there it's possibly a Z22 block. But lets not get ahead of ourselves here. I see that it has the original L16 exhaust manifold. But the thermostat by pass and coolant line from the intake has been disconnected and sealed. It will warm up and run better is that were replaced and put in working order. The A87 head is more of an L18 head but works just fine on an L20B. Quote Link to comment
71Hustler Posted May 19, 2015 Author Report Share Posted May 19, 2015 I agree this is weird. I was thrown off by the PO's notes referring to an L20 .40 bore, but I'm also not finding a L20B stamp (I have an L20B in the truck). All I could find was the NISSAN on the passenger's side, plus numbers. I can't find anything on the driver's side, but visibility is nil. I'll try again.Otherwise, what I've learned so far: I've got a whiny differential which I need to figure out what to do with. I took it into Ger-Brock and they think it's a pinion bearing. I opened it up to do a valve adjustment (cold), but someone really torqued on the lock nuts and neither me or my husband could budge them. We went through and checked all of them anyway: a couple are spot on, others are tight (by .05mm). I'm hoping they are movable when the engine is hot. Finally, it diesels here and there--scared the shit out of me the first couple times since I didn't know what was happening. :blush: I read related posts on dieseling last night, so I understand there's a couple ways of finessing this. As a newbie, I also found this old Popular Mechanics article worthwhile as a general explanation. Quote Link to comment
71Hustler Posted May 20, 2015 Author Report Share Posted May 20, 2015 Look on the top of the block where it meets the head, directly behind the dip stick handle. If it's an L series engine it will say L16, L18 or L20B. If it does not have the engine size stamped there it's possibly a Z22 block. But lets not get ahead of ourselves here. I see that it has the original L16 exhaust manifold. But the thermostat by pass and coolant line from the intake has been disconnected and sealed. It will warm up and run better is that were replaced and put in working order. The A87 head is more of an L18 head but works just fine on an L20B. Ok, had to get a small light in there, but finally found the Z22 stamp on the driver's side of the block. Thanks for the tip re: the coolant line. Quote Link to comment
Draker Posted May 20, 2015 Report Share Posted May 20, 2015 I remember chuck telling me about this LZ. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.