1978 C210 Skyline from Russia

[8bargarage]

Hi, everybody! Recently I bought Skyline c210. L20 6cyl motor. A body in bad condition but I found the donor with the necessary spare parts. I have the car service and there is an opportunity to restore the old man. I want to collect a stroker 3.1L. So far I bought only L28 N42 head. Slowly I assemble the necessary spare parts. Admit to club :)

It is a little car and parts photo

 

 

[datzenmike]

Holy crap, that's interesting. Very rare to find parts for it though. Where will you find a diesel crankshaft?

 

Welcome to Ratsun Mikhail.

[8bargarage]

Holy crap, that's interesting. Very rare to find parts for it though. Where will you find a diesel crankshaft?

 

Welcome to Ratsun Mikhail.

At us LD28 are rather widespread and cost not much absolutely. Japanese spare parts at us in bulk)

I am not Mikhail I am Alexander)) Thanx)

[Ratwagon1600]

Theres so many jokes here, but before I go Putin my foot in my mouth.........

 

welcome to Ratsun from Australia.

[datzenmike]

At us LD28 are rather widespread and cost not much absolutely. Japanese spare parts at us in bulk)

I am not Mikhail I am Alexander)) Thanx)

 

 

Ha ha, many new members don't post their names so I took a guess using a common enough rooski name. No offense Alexander.

[8bargarage]

Ha ha, many new members don't post their names so I took a guess using a common enough rooski name. No offense Alexander.

It is a little surprised what not Ivan)))

[datzenmike]

I thought of Sergei but Ivan would have been better. :thumbup:

[8bargarage]

And here still my cars)

ECR33 RB26DETT

W221 S500

S13 Silvia 2JZ-GTE

[8bargarage]

I thought of Sergei but Ivan would have been better. :thumbup:

Yes perhaps at us Sergey meets more often than Ivan)

[8bargarage]

My C210 start and rev

http://vk.com/video245238378_170923490

I am engaged in operational development of cars (swap and more porn:)
I have a community to whom be interestingly added to social networks
http://vk.com/8bargarage

[MikeRL411]

Are you legally able to register a Right Hand Drive vehicle in the Moscow district?  I hope so., or you just might be wasting a bunch or Rubles.

[Rhino13]

Are you legally able to register a Right Hand Drive vehicle in the Moscow district? I hope so., or you just might be wasting a bunch or Rubles.

That red car he posted is right hand drive.

Also awesome car! I wish these were easier to find in Oregon.

[ggzilla]

Cannot be found in Oregon at all because R33 Skyline does not meet USA crash safety regulations.

[Rhino13]

Cannot be found in Oregon at all because R33 Skyline does not meet USA crash safety regulations.

Damn.

[flatcat19]

MotoRex, what?

 

 

I have a friend here in Tri-Cities with an R32 GT-S. Registered as an S13. 

 

 

 

end/:threadjack

[8bargarage]

Are you legally able to register a Right Hand Drive vehicle in the Moscow district?  I hope so., or you just might be wasting a bunch or Rubles.

Yes cars with the right hand at us are legal

[8bargarage]

That red car he posted is right hand drive.

Also awesome car! I wish these were easier to find in Oregon.

In Russia we have lots of R33 )

[8bargarage]

The JZ engine is now very popular with us
In my workshop now in the course of construction of BMW E30 2JZGTE and E34 1JZGTE
To them built Silvia S15 1JZGTE

[Busta Nut]

I'm lookin forward to this...... :thumbup:

 

 

Sweet ride Alexander!!!

[8bargarage]

Thanks for warm welcome!
So far there is no opportunity to be engaged in the car
but next week we will import a car into the box and will begin)

[mrbigtanker]

Privet my friend..

 

Now dasvedanya.. I did not spell it right I know

[8bargarage]

Privet my friend..

Now dasvedanya.. I did not spell it right I know

Your russian is good!))) Hi my friend - privet moy drug(drug = friend :))

Bye - dosvidaniya, poka, bivay)

[8bargarage]

Yesterday installed the engine on e30 and the brake cylinder from 540

Looks not bad)

[8bargarage]

I find ld28 crank)!! i find nassan laurel with ld28 and going to bay him soon.

What about 3l stroker at ld28 block? Possible?

[Lockleaf]

Yes the motor can be stroked and bored out to a 3.1 liter using that diesel crank. It's a pretty cool motor built like that.