Jump to content
mrbigtanker

Mr Big Tanker's watermelon wagon.

Recommended Posts

Stock NA 280ZX are flat tops, 86mm bore, same pin height as L20B. ~ 10.5:1 with peanut head, even higher with that 210 head you have there. Better to use a U67 L20B head if you want to run safely on pump gas.

  • Like 2

Share this post


Link to post
10 minutes ago, Tedman said:

Stock NA 280ZX are flat tops, 86mm bore, same pin height as L20B. ~ 10.5:1 with peanut head, even higher with that 210 head you have there. Better to use a U67 L20B head if you want to run safely on pump gas.

The head I have is all tricked out. Lesson after 1500.00. Lol. But getting ported to 38 mm. So I am sure it will be good. Do you have a flywheel for L20. 

  • Like 1

Share this post


Link to post
46 minutes ago, mrbigtanker said:

Do you have a flywheel for L20. 

Yeah, I have a stock cast iron Z flywheel that fits an L20B. Takes a 225mm clutch.  Weighs ~22 lbs vs. closer to 30 for a stock L20B one. PM me if interested.

  • Like 1

Share this post


Link to post
On 2/12/2019 at 9:26 PM, Tedman said:

Yeah, I have a stock cast iron Z flywheel that fits an L20B. Takes a 225mm clutch.  Weighs ~22 lbs vs. closer to 30 for a stock L20B one. PM me if interested.

Thank you sir for the Flywheel.

  • Like 1

Share this post


Link to post
2 hours ago, thisismatt said:

Ray, when are you gonna start spending some money on this project? ?

Soon real soon. Waiting for tax returns. Wait never mind I pay for some odd reason. Lol

  • Like 2

Share this post


Link to post

Hey look!  You got a camber plate for your motor! ?

 

And damn it, Mr Big!  I've been looking at those Work Meister wheels for a while now, and realized you have a set on your wagon.  Back to the drawing board..

 

 

 

 

Edited by Duncan
  • Like 3

Share this post


Link to post

I've been thinking about it and figure you could just send all that stuff over here and I'll put it on the 70 510.

 

724E0295-9AEB-4094-A102-72788C10464E.jpg

  • Like 2

Share this post


Link to post
2 hours ago, edekalil said:

I've been thinking about it and figure you could just send all that stuff over here and I'll put it on the 70 510.

 

724E0295-9AEB-4094-A102-72788C10464E.jpg

Or you just send the 2 door to me.

  • Like 2

Share this post


Link to post
2 hours ago, mrbigtanker said:

Or you just send the 2 door to me.

Excellent response 👍.

  • Like 2

Share this post


Link to post
8 hours ago, mrbigtanker said:

Or I get a bluebird.  Hint hint wink wink

Excellent idea. I was very tempted to get a 4 door Bluebird someone had for sell a couple of years ago. I just have no room. You want a 64 Formula S Cuda with a wacked out 340 in it. I need some room in the garage. 

  • Like 2

Share this post


Link to post
On 2/17/2019 at 1:47 AM, mrbigtanker said:

 

46395705124_ae47c9a438_k.jpg

 

Just some parts for the new build.

 

 

What's the dish on those pistons, and what CR are you aiming for?  Maybe you showed the head already, but many of the earlier pictures are not showing up.

 

Thanks.

  • Like 1

Share this post


Link to post
7 hours ago, iceman510 said:

 

 

What's the dish on those pistons, and what CR are you aiming for?  Maybe you showed the head already, but many of the earlier pictures are not showing up.

 

Thanks.

Give me some time and I will try to get you a part number. Also I'm  not sure on compression ratio.

  • Like 1

Share this post


Link to post
On 3/8/2019 at 6:08 PM, mrbigtanker said:

32379858557_5c18ae7bcb_b.jpgUntitled by raymond medeiros, on Flickr

 

32379858577_5e1c138942_b.jpgUntitled by raymond medeiros, on Flickr

 

No re pops here. Thanks Jimmy.

this is all stripped and and powder coat shop and chrome shop, it will be nice. Now I need to find a car to put it on.

  • Like 2

Share this post


Link to post
3 hours ago, mrbigtanker said:

this is all stripped and and powder coat shop and chrome shop, it will be nice. Now I need to find a car to put it on.

 

Great buy there, glad to see it go to a good home.

  • Like 2

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.