shacks510 Posted December 24, 2015 Report Share Posted December 24, 2015 What do you plan on using for a fuel management system? Quote Link to comment
mrbigtanker Posted December 24, 2015 Author Report Share Posted December 24, 2015 Tanker. I do get a hard on and all that. It looks clean as hell. But that ignition wire holder is killing it. Aside from that. Fuckin A!!! I'm stoked for you. Hawaiian whats wrong with the wire holder, i dont like the wires going over the valve cover or anything for that matter. but thank you for the compliment. Mele Kalikimaka Quote Link to comment
tr8er Posted December 24, 2015 Report Share Posted December 24, 2015 Mele for sure. I agree with the wire routing around the front. The valve cover is too perfect to cover. I just think the solid block of billet aluminum looks out of place. I've been struggling with mine as well, so I'm not able to offer a better solution. I hope Santa brings you Datsun goodies. Quote Link to comment
mrbigtanker Posted December 24, 2015 Author Report Share Posted December 24, 2015 Mele for sure. I agree with the wire routing around the front. The valve cover is too perfect to cover. I just think the solid block of billet aluminum looks out of place. I've been struggling with mine as well, so I'm not able to offer a better solution. I hope Santa brings you Datsun goodies. I see what your saying,could make a double stacked one to make it tighter to the head. I will ask Juan about that throw the idea at him. Quote Link to comment
B-Mackin Posted December 24, 2015 Report Share Posted December 24, 2015 How it looks as of today. The right stacks are on the way along with all electronics to get this done sooner or later. Take that back out and come buy my motor. 1 Quote Link to comment
maltese Posted December 24, 2015 Report Share Posted December 24, 2015 Needs blue plug wires. :poke: 2 Quote Link to comment
mrbigtanker Posted December 24, 2015 Author Report Share Posted December 24, 2015 Take that back out and come buy my motor. Its not to late... 1 Quote Link to comment
datrod Posted December 24, 2015 Report Share Posted December 24, 2015 Ray. The catch can looks great, But your going to need to drain that thing. It's mounted to low and the hose should be on top not on the bottom. If you get any oil blow by it's just going to fill up that hose. 1 Quote Link to comment
q-tip Posted December 24, 2015 Report Share Posted December 24, 2015 Ray. The catch can looks great, But your going to need to drain that thing. It's mounted to low and the hose should be on top not on the bottom. If you get any oil blow by it's just going to fill up that hose. Yeah all the blow by he's going to get driving it on and off a trailer.... 2 Quote Link to comment
mrbigtanker Posted December 24, 2015 Author Report Share Posted December 24, 2015 Yeah all the blow by he's going to get driving it on and off a trailer.... good one. fuck you are good. Quote Link to comment
skyblue Posted December 24, 2015 Report Share Posted December 24, 2015 I don't think tanker even owns a trailer. 1 Quote Link to comment
mrbigtanker Posted December 24, 2015 Author Report Share Posted December 24, 2015 I don't think tanker even owns a trailer. I dont, hello Mike merry christmas. Quote Link to comment
BigBopper805 Posted December 25, 2015 Report Share Posted December 25, 2015 How it looks as of today. The right stacks are on the way along with all electronics to get this done sooner or later. Your engine compartment loox very nice Big Strapper actually your wagon is coming along nicely. Hope to see it at the next show, may you and yours have a Merry Xmas. 2 Quote Link to comment
shacks510 Posted December 25, 2015 Report Share Posted December 25, 2015 Ray.The catch can looks great, But your going to need to drain that thing. It's mounted to low and the hose should be on top not on the bottom.If you get any oil blow by it's just going to fill up that hose.The oil in the head will slosh back into the hose with all that torque jk cars that don't drive don't need oil or catch cans :rofl: 2 Quote Link to comment
q-tip Posted December 25, 2015 Report Share Posted December 25, 2015 good one. fuck you are good. Hmmmm, I cant quiet tell if you used the sarcasm faunt or not. :lol: 1 Quote Link to comment
mrbigtanker Posted December 25, 2015 Author Report Share Posted December 25, 2015 assholes. Merry Christmas 2 Quote Link to comment
Draker Posted December 26, 2015 Report Share Posted December 26, 2015 I've got a period correct clock I'll sell you for this. Only $700. 1 Quote Link to comment
mrbigtanker Posted December 26, 2015 Author Report Share Posted December 26, 2015 I've got a period correct clock I'll sell you for this. Only $700. Paypal please. haha that is funny. Quote Link to comment
Ranman72 Posted December 26, 2015 Report Share Posted December 26, 2015 merry christmas your new old wagoon is looking fantastic 1 Quote Link to comment
B-Mackin Posted December 29, 2015 Report Share Posted December 29, 2015 Its not to late... Lets talk about a price, for the whole car maybe... 1 Quote Link to comment
datrod Posted December 29, 2015 Report Share Posted December 29, 2015 Brandon. You still lookin to sell your motor? 1 Quote Link to comment
B-Mackin Posted December 29, 2015 Report Share Posted December 29, 2015 Brandon. You still lookin to sell your motor? Honestly I want to sell the whole car and I might put it on BAT Action or EBAY. I have it running great but it really needs something like fuel injection or 50mm carbs to get optimum performance. it made 179whp on the Rebello Dyno with the 40mm Makuni Solex's I have on it now but i'm running them without a choke and they are gutted so it loads up at idle. I want to keep it and continue my quest for 200whp but with my new child i just dont have time anymore to keep tweeking it. I think I'll get something like a 98 Dodge Viper (last year with forged internals) and Supercharge it. 1 Quote Link to comment
q-tip Posted December 29, 2015 Report Share Posted December 29, 2015 I'm certain the the Dodge viper had more than 200hp stock, I don't think you'll need a supercharger to acheave your goal. :lol: 2 Quote Link to comment
Lockleaf Posted December 30, 2015 Report Share Posted December 30, 2015 Hey tanker, just saw this pic in an old thread and it made me think of your engine bay. He has a similar spark plug wire holder as you, with a nice treatment on it. 2 Quote Link to comment
mrbigtanker Posted December 30, 2015 Author Report Share Posted December 30, 2015 Hey tanker, just saw this pic in an old thread and it made me think of your engine bay. He has a similar spark plug wire holder as you, with a nice treatment on it. Yeah thanks are guy Juan makes them and he anodized them with engravings but I just wanted a non polish raw look. Maybe polish or I might ask him to make a new one that is doubled so it does not hang out so much. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.