Just Joel Posted August 18, 2015 Report Share Posted August 18, 2015 All this ^^^^ Quote Link to comment
mrbigtanker Posted August 18, 2015 Author Report Share Posted August 18, 2015 No I am going to run them until failure want to see how it feels to build a Ratsun low budget Datsun.there still good so I will run them for now. 1 Quote Link to comment
shacks510 Posted August 18, 2015 Report Share Posted August 18, 2015 lol I can imagine the wheels flopping left and right with no bushings in there. "What's that sound? ... and why is the steering wheel shaking so much?" "Nah man, it's fine." 1 Quote Link to comment
r0p0doe Posted August 18, 2015 Report Share Posted August 18, 2015 No I am going to run them until failure want to see how it feels to build a Ratsun low budget Datsun.there still good so I will run them for now. Livin life on the edge 1 Quote Link to comment
mrbigtanker Posted August 18, 2015 Author Report Share Posted August 18, 2015 I already checked them and they are fine, if they go out I will just put the wagon on a trailer and drive it that way. 2 Quote Link to comment
Just Joel Posted August 18, 2015 Report Share Posted August 18, 2015 At least your planning ahead :rofl: 1 Quote Link to comment
mrbigtanker Posted August 18, 2015 Author Report Share Posted August 18, 2015 At least your planning ahead :rofl: Hayyyyyyyy Quote Link to comment
shacks510 Posted August 18, 2015 Report Share Posted August 18, 2015 Hay's for horses Horses are for power. Power is for going fast. Fast causes G's. Too many G's causes blackouts. Blackouts cause wrecks. Wrecks cause death. Death calls for a coffin. Coffin has hay for you to lay on. Quote Link to comment
shacks510 Posted August 18, 2015 Report Share Posted August 18, 2015 ... i'm bored ok Quote Link to comment
tr8er Posted August 18, 2015 Report Share Posted August 18, 2015 ... i'm bored ok This is the right thread. Quote Link to comment
mrbigtanker Posted August 18, 2015 Author Report Share Posted August 18, 2015 Nothing to see in this thread. Quote Link to comment
hobospyder Posted August 18, 2015 Report Share Posted August 18, 2015 I think that's why he's bored 1 Quote Link to comment
datsunfreak Posted August 19, 2015 Report Share Posted August 19, 2015 there still good so I will run them for now. I sincerely hope this is a joke... Quote Link to comment
GoGoGo Posted August 19, 2015 Report Share Posted August 19, 2015 From what little I know about you it seems like you do things the right way. I concur with everyone else and would remove the bushings, re-powdercoat and replace. If you're anything like me you are going to be thinking about them every time you hear a little clunk in the front suspension (if you don't replace them). Just do it and don't worry about what any of us think. No need to even post an update on them. You'll be happier in the long run. 1 Quote Link to comment
thisismatt Posted August 19, 2015 Report Share Posted August 19, 2015 They could be R&R'd without damaging the PC. You don't have to burn out the bushings... 1 Quote Link to comment
datsunfreak Posted August 19, 2015 Report Share Posted August 19, 2015 They could be R&R'd without damaging the PC. You don't have to burn out the bushings... Honestly, after spending half an hour in a 400 degree oven, they might push out with your fingers... :rofl: 1 Quote Link to comment
mrbigtanker Posted August 19, 2015 Author Report Share Posted August 19, 2015 I will have them taken care of. But no they don't push out and they are for now solid. Quote Link to comment
Duncan Posted August 19, 2015 Report Share Posted August 19, 2015 I made some tooling so they can push right out and back in easily with most any hydraulic press. You can borrow them if you need them. No need to cut them and hack them out. If you want to make the drive to San Diego, we can make a 10 minute job of it. 2 Quote Link to comment
mrbigtanker Posted August 19, 2015 Author Report Share Posted August 19, 2015 Sounds good mark thank you. Quote Link to comment
jrock4224 Posted August 19, 2015 Report Share Posted August 19, 2015 They could be R&R'd without damaging the PC. You don't have to burn out the bushings.. no the powder bridges the gap ... those low rent places do bs prep work ... it will fuck up the powder even with out fire ... u my friend would be sent back home to remove those bushing if u came to my shop ... 2 Quote Link to comment
mrbigtanker Posted August 20, 2015 Author Report Share Posted August 20, 2015 no the powder bridges the gap ... those low rent places do bs prep work ... it will fuck up the powder even with out fire ... u my friend would be sent back home to remove those bushing if u came to my shop ... Jrock don't sling shit at the shop I use remember what you said before about talking about your shop or other powder coaters right. I said before the guy is my friend and slips me in when he has a chance. They know what there doing I just have them do it. 1 Quote Link to comment
mrbigtanker Posted August 20, 2015 Author Report Share Posted August 20, 2015 Also who cares if they get damaged I'll get them re done for free.. Quote Link to comment
jrock4224 Posted August 20, 2015 Report Share Posted August 20, 2015 im not slinging shit ... its facts ... sorry..... wham and bam shops cut corners which they did u a disserivce by coating that ... most shops would call u if they cared.... Quote Link to comment
jrock4224 Posted August 20, 2015 Report Share Posted August 20, 2015 Also who cares if they get damaged I'll get them re done for free.. look at the rich guy expecting stuff for free,.... :blush: 1 Quote Link to comment
mrbigtanker Posted August 20, 2015 Author Report Share Posted August 20, 2015 im not slinging shit ... its facts ... sorry..... wham and bam shops cut corners which they did u a disserivce by coating that ... most shops would call u if they cared.... Dont be sorry just remember those are your words,Thats what you said. And again he would just do them for free, besides there going under the car I mean really no one is really going to see it. And now I am going to put them on just to see how long they will last.lol Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.