jrock4224 Posted May 19, 2015 Report Share Posted May 19, 2015 nice !!! congrats man 2 Quote Link to comment
Busta Nut Posted May 19, 2015 Report Share Posted May 19, 2015 No reason why this shouldn't drive today!!!!! 3 Quote Link to comment
skyblue Posted May 20, 2015 Report Share Posted May 20, 2015 Light test. Not bad for having sat 25+ years 5 Quote Link to comment
Kalani Posted May 20, 2015 Author Report Share Posted May 20, 2015 the homie kris, got to the shop and SKyblue had already started putting the lights back on and All I did was vaccum out the bullshit and hooking up the fuel line shiz awwww yeeeeahhh gimme light baby!! Ratsun head light setup fasho 5 Quote Link to comment
Kalani Posted May 20, 2015 Author Report Share Posted May 20, 2015 I didnt take oics of the fuel pump setup last night!! Did you Busta?? haha scrubbbyyyyyy edit* fenders need to be rolled because I need to run spacers now due to the tie rod clearance after the bump steer spacers were installed. and longer wheel studs. fucky edit* 2 whats the bolt pattern for 510s? 4 by 114 right? from what I found Quote Link to comment
r0p0doe Posted May 20, 2015 Report Share Posted May 20, 2015 Great progress man 3 Quote Link to comment
Busta Nut Posted May 20, 2015 Report Share Posted May 20, 2015 Now the tie rod end rubbs the inside of the rim......need a 5mm spacer..... 3 Quote Link to comment
Just Joel Posted May 20, 2015 Report Share Posted May 20, 2015 Yep 4 on 114.3 4 Quote Link to comment
mrbigtanker Posted May 20, 2015 Report Share Posted May 20, 2015 Wow looks fuckin fabulous. Very nice job right there 2 Quote Link to comment
FirstDime Posted May 20, 2015 Report Share Posted May 20, 2015 i love the way you decided to set this all up, looks so fucking clean :thumbup: :thumbup: :thumbup: :thumbup: :thumbup: :thumbup: 3 Quote Link to comment
Kalani Posted May 20, 2015 Author Report Share Posted May 20, 2015 i love the way you decided to set this all up, looks so fucking clean :thumbup: :thumbup: :thumbup: :thumbup: :thumbup: :thumbup: come check it out! 2 Quote Link to comment
INDY510 Posted May 21, 2015 Report Share Posted May 21, 2015 I have some 5mm spacers you guys can borrow for a few months ..... might be 6 or 7mm, but definitely more than 5mm .... I can probably drop them off tomorrow 2 Quote Link to comment
Janksun Posted May 21, 2015 Report Share Posted May 21, 2015 Or just take the bump steer spacers out for now, I don't run them and I'm pretty low. 1 Quote Link to comment
Lockleaf Posted May 21, 2015 Report Share Posted May 21, 2015 Hey look it's a pic of Busta(?) taking the pic he posted. I'm actually pretty impressed how much detail I can make out on his phone screen :) Car is coming along very nicely. Pretty quickly too. Great work! 2 Quote Link to comment
skyblue Posted May 21, 2015 Report Share Posted May 21, 2015 I was hoping some in would catch that. Lol Here's a little vid from yesterday 3 Quote Link to comment
Busta Nut Posted May 21, 2015 Report Share Posted May 21, 2015 Clutch bled and adjusted......... ......for the most part..... 2 Quote Link to comment
Busta Nut Posted May 21, 2015 Report Share Posted May 21, 2015 This was not gonna cut it for the pedal stop...... So found this...... 1 Quote Link to comment
r0p0doe Posted May 21, 2015 Report Share Posted May 21, 2015 What size are the new studs I think I may have to get longer ones for my car as well 1 Quote Link to comment
Busta Nut Posted May 21, 2015 Report Share Posted May 21, 2015 Got everything tightened up and fuel in the tank last night...... .....skyblue wired in the fuel pump and no leaks were found when we turned it on...... Filled the engine with coolant and let it warm up last night....runs good...... ..................annoying squeak is going on...... ....hard to tell where it's coming from..... Needs some timing and carb adjustments.......we called it a night...... Did anyone get video?? 3 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.