skyblue Posted May 13, 2015 Report Share Posted May 13, 2015 Stopped by for a couple of hours yesterday and hooked up the alternator and tightened the belt. Only think left is fuel line. 7 Quote Link to comment
Kalani Posted May 13, 2015 Author Report Share Posted May 13, 2015 FUCKIN GUY! I thought no one was gonna be there! :frantics: THE HOMIE SKYBLUE this little trick that he showed me, but i scratched my spark plug wires :hmm: 4 Quote Link to comment
Kalani Posted May 13, 2015 Author Report Share Posted May 13, 2015 metal coat hangers are great for mocking up the rest of the fuel line. running it on this side of the frame instead because I'd rather the fuel line not come up on the inside of the wheel well. And there were those handy tabs to hold it up! I dont know why they were there in the first place, they were bent the other way not being used for anything. 3 Quote Link to comment
Mattndew76 Posted May 13, 2015 Report Share Posted May 13, 2015 Zip tie wire racks happen. They are cool. 2 Quote Link to comment
jrock4224 Posted May 13, 2015 Report Share Posted May 13, 2015 learned that trick building sick dune quads in the 2000's ... love the zip tie rack ... 1 Quote Link to comment
skyblue Posted May 13, 2015 Report Share Posted May 13, 2015 Nice. I stopped by around 2 and left 'bout 4. Had some time to kill. 1 Quote Link to comment
banzai510(hainz) Posted May 13, 2015 Report Share Posted May 13, 2015 like the black shrienk with the goo inside and the ziptie idea what alt is that ? 1 Quote Link to comment
skyblue Posted May 13, 2015 Report Share Posted May 13, 2015 I believe it's from a hardbody. 60Amp 2 Quote Link to comment
Busta Nut Posted May 13, 2015 Report Share Posted May 13, 2015 what alt is that ? 90 Nissan D21 Usually comes with a new pulley.......10mm bolts on the bottom though.... .....you can stick inserts in the alt or drill out the bracket..... ...........I recommend drilling the bracket..... 1 Quote Link to comment
banzai510(hainz) Posted May 13, 2015 Report Share Posted May 13, 2015 Got it I had my L16mount machine out so I knew it would be straight. I had hand drilled(wasnt straight) one and it would oblong over time the mount and the alternator holes due to vibration Quote Link to comment
DottiBlue Posted May 19, 2015 Report Share Posted May 19, 2015 Bitch is alive!! 8 Quote Link to comment
skyblue Posted May 19, 2015 Report Share Posted May 19, 2015 sweeeeet!!!! :frantics: :frantics: :frantics: 3 Quote Link to comment
DottiBlue Posted May 19, 2015 Report Share Posted May 19, 2015 Cleared some shit out of the exhaust. 5 Quote Link to comment
skyblue Posted May 19, 2015 Report Share Posted May 19, 2015 oil pressure good? what starter did you end up going with? Quote Link to comment
mrbigtanker Posted May 19, 2015 Report Share Posted May 19, 2015 You fa'ka you like race.lol looking good. I now like the blue wires over the green top battery.lol 3 Quote Link to comment
DottiBlue Posted May 19, 2015 Report Share Posted May 19, 2015 Oil pressure popped right up after a couple seconds. Antony said the starter was off of an 84 maxima or something. 1 Quote Link to comment
Busta Nut Posted May 19, 2015 Report Share Posted May 19, 2015 Part number for gear reduction starter..... 23300-N5903R Fits early 80s zx and 84 maxima..... Napa #244-4874 Worked like a charm..... Oil pressure popped to 70psi after a couple seconds...... 2 Quote Link to comment
demo243 Posted May 19, 2015 Report Share Posted May 19, 2015 Kalani here is the shot I was talking about with the fuel lines… not the same as you will be running but still looks good 2 Quote Link to comment
Kalani Posted May 19, 2015 Author Report Share Posted May 19, 2015 You fa'ka you like race.lol looking good. I now like the blue wires over the green top battery.lol ya you faka haha get one straight RAMBLA! 1 Quote Link to comment
FirstDime Posted May 19, 2015 Report Share Posted May 19, 2015 great work fella's.... is there anything left before test drive or is this little beauty ready to roll :hyper: 1 Quote Link to comment
Kalani Posted May 19, 2015 Author Report Share Posted May 19, 2015 DottiBlue helped me out and milled this bracket a little larger for me to mount my fuel pump to. Just a simple bracket for light fixtures and shit I got from work. :ninja: :ninja: :ninja: 3 Quote Link to comment
Kalani Posted May 19, 2015 Author Report Share Posted May 19, 2015 a fat hole needed to be drilled for the bolt head to stick through on the fuel pump bracket Voila! 4 Quote Link to comment
Kalani Posted May 19, 2015 Author Report Share Posted May 19, 2015 Where the fuel line is gonna come up at. Thanks for the input demo243!!! :thumbup: All thats left is hooking up the regulator, soft line, my bump steer spacers (not to drive it lol) and a other shit I dont know about ? 6 Quote Link to comment
hobospyder Posted May 19, 2015 Report Share Posted May 19, 2015 Put some fluid in your clutch cup? 2 Quote Link to comment
Kalani Posted May 19, 2015 Author Report Share Posted May 19, 2015 Put some fluid in your clutch cup? gonna bleed that today! 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.