Jump to content

Motor swap! Advice!?


Bama720

Recommended Posts

I have a 85 Nissan 720 with the z24 carbed motor 4x4. I'm wantin more power without a lot of problems. I've been thinking of a 350 swap but a lot of cutting would have to be done. So I was thinking of the jeep 4.0 inline 6 motor, trans and maybe even axles. Has anyone done this before or have done and have any info on stuff that'll need to be done?

Link to post
  • Replies 11
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Google will help you find most swaps. Almost everyone swaps a KA motor which is probably less power than your going for. A few people have done 350s with minimal cutting. Im thinking an inline 6 would require more modifications than the 350 since they are so long in an otherwise small bay.

Link to post

Drop a VG33 in there.

 

 

I have a 85 Nissan 720 with the z24 carbed motor 4x4. I'm wantin more power without a lot of problems. I've been thinking of a 350 swap but a lot of cutting would have to be done. So I was thinking of the jeep 4.0 inline 6 motor, trans and maybe even axles. Has anyone done this before or have done and have any info on stuff that'll need to be done?

Link to post

Thought a 350 was v-8? And what do you mean a 6 speed? I was talking bout keepin it carbed with a Holley 4bbl. I just want more power for off-roading really. I know I'll have to swap trans and drive shafts and prolly diffs too cause the torque and power of the 350

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.