1985 720 z24 exhaust emission tubes

[Thomas Perkins]

I am fixing to make a video of my 85 2.4 with Redline Weber 32/36 with Empi idle cut off solenoid and my vacuum lines.I have been using a Weber on this 720 since 2003.First one was a North American Weber with the black choke.Not a Genuine  Weber.It came with a idle cut off solenoid.A Auto shop put it on.They had the wires wrong on the solenoid.I didn't know.Corey from 720 world seen itt and helped me get it right.I had that Weber for 13 years and had issues and thought it was the Fake Weber.So in 2016.I bought a new Real Redline Weber and a new Empi idle cut off solenoid.I first tried using the Weber with out the solenoid but as soon as zi let off the gas it would die.So I installed the Empi solenoid and the rest is history. The egr was replaced years back.It is a real Nissan one.So it runs perfect and I decided to leave all the vacuum lines intact.Cat is gone.I know many people deleted there vacuum lines except  vacuum advance.Mine is a 4x4 with 235-75-15 Wheels.It will fly.Gas mileage is good.Everyone does it there way.Which is great?I do use Ngk Iriduim and to me they are better.Rock Auto Parts has the best price on them.I am not into trying to make it faster.It's just a 4 banger.If I want to go fast, I can drive my wifes car and get a ticket.Cops patrol all around here.I do have quite a few videos on my facebook page on my 720.All the way back to 2010.Some are with my old fake Weber and Toyota Enkei  rims I had on it.It's listed under Tommy Perkins.One has 79,000 views.You can see my vacuum  lines on there with me explaining them.Also see my 04 Tundra I had that I wish I kept.It had Borla's on them.Wish they made them forv720.Stainless steal.Came on it from Factory.I bought truck new for 31.grand.I have put 100,000 miles on it since I made this video.Had 305,000 miles on it then and now have over 405,000 miles on it.I may make it to 500,000 miles before I  die.

Edited May 28 by Thomas Perkins

[Thomas Perkins]

34 minutes ago, Thomas Perkins said:

Here is a video I made long ago when I had my first Noth American fake Weber with Empi idle cut off solenoid.It was put on.in 2003.In 2016, I put a Genuine Redline 32-36 K-646 Weber on with the Empi idle cut off solenoid.The vacuum lines are the same except  the hose from the top of tvv  is not used on my New Weber.Cory from 720 world told me to make a hole in air filter plate and put a elbow in it and run a vacuum line to top port of the tvv.So I did.I still have the elbow and air filter bottom plate.I think I know how to send videos here Mike.Thanks for showing me.In this video, my interior was stock.black.It is now gray.A lot of changes from then and now.

https://youtu.be/v5Fe9N0q2Kk?si=pUNLvkih6wzsTguT

Edited May 28 by Thomas Perkins

[Thomas Perkins]

Sorry.Made a mistake.Trying to learn on how to send videos here.

Edited May 28 by Thomas Perkins

[Thomas Perkins]

7 minutes ago, Thomas Perkins said:

Here is my latest video.A few years old.Lots of things have changed since I made this video.Vacuum hoses are still the same.

https://youtube.com/watch?v=u2p8yubP0eU&si=9LdfsC3onAUNE256

Edited May 28 by Thomas Perkins

[datzenmike]

 

[Thomas Perkins]

2 hours ago, datzenmike said:

 

Mike.When I went to my you tube page.It first showed what you sent,then it disappeared  and now it just shows the link.Cant figure it out.

Edited May 28 by Thomas Perkins

[datzenmike]

Weird. 

 

[Thomas Perkins]

Mike.I think it is this site doing this.Sometimes I can go to my pictures on my phone and send here and sometimes I cant.How I make it send it  here is send it to my facebook page.Then download to phone.Then go back here and send it.Works everytime.I think the Chinese are doing something here.Don't you.

Edited May 29 by Thomas Perkins