sam Posted September 8, 2013 Report Share Posted September 8, 2013 I have a ka24de stock harness but when I use the Diagram to check all my wires to wire them up with relays my colors dont match the same color on the diagram.My pin 109 is red not b/w I have no idea what to do because my red wire should be my constant 12v with Pin 46 but my pin 109 in the regular diagram should its b/w but mine is not . I just want to be 100% sure I don't want to fry anything here is the picture I'm going of by http://i1081.photobucket.com/albums/j347/radzuniga77/SP32-20090113-084734_zpscc026da8.gif And I'm following this one http://i1081.photobucket.com/albums/j347/radzuniga77/21kdopl_zps266c9671.jpg My harness looks like this. As you can tell my far right pins 109 is red and 101 is white and black http://i71.photobucket.com/albums/i153/andrew_g_pearson/pinout.jpg Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.