Jump to content

Twisted Images Bagged, Body Dropped, & Rotary Powered 510


Recommended Posts

Just painting everything underneath- frame rails, underside of the floor, suspension parts, etc.  The interior floor is getting clear coated but staying raw steel.  I don't plan to go wild with the suspension and undercarriage- probably all black, with maybe a few silver parts here and there.  The car is silly enough without painting the suspension pink!

  • Like 2
Link to post
  • Replies 663
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

  • 2 weeks later...

Travis finished enough of the welding work that I could move on to the next part of my project, so I picked the car up last night!  I rearranged the garage last weekend to make room again, so now it's time to get started on seat mounts, pedal assemblies, and other interior stuff!

 

435.jpg

 

Also, I've wanted to make a t-shirt with my car on it forever, and I finally pulled the trigger!  

 

twistedshirt.jpg

 

I had them designed and printed by Graphic Disorder - should be in stock next week!!  If you want one, go to www.twistedimages.com - I've got them in the store.

  • Like 2
Link to post

memories… is that a redline or a haro on the back wall? looks sick. 

'87 Haro FSX.  I had one as a kid, and it got stolen out of my garage.  I found this one a few years ago and restored it as close to my old bike as possible... then I rode it a couple of times and there it sits!  I've got too much invested in it to actually attempt any tricks, so it's a decoration now.  Stupid, huh?

Link to post

Mmmm Ol skool BMX and Datsuns. Talking my language. I snagged this 100% survivor Haro Sport at a flea market a few years back. Original tires even. I wanted to keep it, but couldn't turn down the $1500 I was offered for it. There is gold in the rare BMX goodness of our past. I saw a pair of NOS Hutch pedals sell for about $1000... just two pedals.

 

IMG_2751.jpg

 

IMG_2774.jpg

  • Like 6
Link to post

Ha!  That's awesome that we've got some old school Haro guys on here!

 

Here's my original bike, with me in my original short-shorts back in '87!

 

haro1987.jpg

 

My recreation has 3-piece cranks with triple traps, and white cables with a Pit Bull rear brake, but otherwise it's pretty faithful to the original!  

 

My current shorts, however, are MUCH longer.

  • Like 2
Link to post

Speaking of hobbies and distractions from my actual car project, here's a shot of an RC car I've been working on:

 

rccar.jpg

 

I created the graphics and tail panel using some clear Avery label material, but I'll have to find something a little better for the tail lights.  I'll make a rusty version eventually to match the real car!

  • Like 7
Link to post

I'm kind of at the stage where I'm able to get a bunch of stuff done, but none of it is very visually impressive!  Lots of small details and fine-tuning of parts, which take a bunch of time without looking like you got much done...

 

I reinstalled the dash shell and welded a mount for the steering column to hang off the dash bar.  With the steering wheel in the right place, and finally having a floor inside the car, I was able to bring my seats home and start figuring out where they'll need to be:

 

436.jpg

 

The seats fit better than I could have hoped- just a slight rise in the front brackets and I'll be set.  Lots of leg room, a bit of space behind to clear the cage, and a perfect width.  My reach to the steering wheel is a bit longer than I'd prefer, and my column is almost fully extended, so I may run a larger hub spacer to bring the wheel back another inch.  With the seat in the correct position, I can now focus on my pedals.  The plan is to run my master cylinders inside the car, so reverse-swing pedal boxes are going to be the ticket I think.  The steering column is in the way of running a single pedal box for brakes and clutch, but I think I can run a pair of separate pedal assemblies to straddle the column and get everything where I want it.  Gonna order some parts and see where they take me!

 

The steering column I'm using is from Speedway, and has a telescoping splined shaft inside a 1.125" outer tube.  Nobody I've found makes a firewall bulkhead plate for this size shaft to seal up the hole in the firewall, so my buddy and I came up with a solution.  I chucked a go-kart axle bearing on our lathe at work and bored the center out- it's normally 1" ID.  Blew out a tip running it through the steel bearing, but it got the job done!

 

437.jpg

 

The flange for this bearing allows it to pivot, so we'll just make some good-looking mounting plates for the flanges and it should be all good!

 

Also, this was a milestone for me: I've never actually sat in this car until this week!  Never had a floor or seats, so it was a good feeling getting "behind the wheel" of a Datsun again!

  • Like 4
Link to post

Great work! What are the seats out of?

 

They're Recaros out of a Mk2 Volkswagen.  They must have been in storage for the past couple decades, because they're in great shape!  I'd love to re-cover them in something fancier later on, and swap the headrests for the mesh style, but these are great for now.

Link to post

After stacking some wood shims to figure out seat height, I designed and cut the brackets I'd need to get them properly mounted to the car.  Laid out the bolt pattern for the rails on the computer and cut them on our plasma table:

 

440.jpg

 

Cleaned up the parts, formed some 90 degree bends in them on the brake, and bolted them to the seats.  I used 1x1 .120 wall box tubing to connect the left and right rails together, and welded mounting tabs to the bottom edge of the box to bolt through the floor of the car.

 

441.jpg

 

Now that I live in a house with proper garage electrical, I was able to weld these up myself- it's nice to start and finish a project like this in one day!  My welds aren't pretty by any stretch, but they're strong, and they won't show under the seats!

 

Bolted the brackets back onto the seat bases, and threw them back in the car:

 

442.jpg

 

443.jpg

 

Perfect height to rest my arm on the window sill!

 

Next up: pedals.  I've got the clutch figured out- just a reverse-swing bracket with a Wilwood master.  The brake is going to be a little trickier because of space, so I'm thinking I'll make a 90 degree box that will put the master in the dash pointing toward the radio area.  Keeping it central and over the tunnel will simplify my plumbing, and give me room for gauges in the factory spots.  Hope to have them designed and mocked up this weekend!

  • Like 4
Link to post

Nice work. I've had a nice welder for a year now and no 220 to run it in my garage. I need to get on that. Always something else to occupy my time.

Link to post

Nice work. I've had a nice welder for a year now and no 220 to run it in my garage. I need to get on that. Always something else to occupy my time.

 

This one is just a little 110 Lincoln, but it's great for small projects like this and tacking things into place before the REAL welding gets done elsewhere.  At my old house I couldn't use it- as soon as it would arc the voltage would drop and the wire would stop feeding!

Link to post
  • 2 weeks later...

Big weekend updates!

 

Saturday morning, I grabbed the trusty Roadmaster, hitched up the tow dolly, and towed the car down to my buddy Travis' shop

450.jpeg

 

We started cleaning up the surface rust on the frame and underside of the floors, welding up the last few seams on the frame, and pulled the suspension out of the car.  Finally added front shock mounts, too:

451.jpeg

 

We cut and welded some fish plates to overlap the butted frame rail areas for extra strength:

452.jpeg

 

453.jpeg

 

Holy crap- the car is TOTALLY pulled apart!

454.jpeg

 

455.jpeg

 

456.jpeg

 

With the fab work complete, we hit the frame rails with a few coats of primer and paint

457.jpeg

 

458.jpeg

 

459.jpeg

 

Travis is going to body work the firewall and paint it this week, and I've got all of the suspension going down for powder coating:

460.jpeg

 

I ordered up new bushings and bearings for the rear, so if everything goes to plan I'll be reassembling the car next weekend!

  • Like 7
Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.