Jump to content
Sign in to follow this  
Twodoordime

s13 sr20det and s14 sr20de

Recommended Posts

Im selling both my sr20's because im never going to use them. My cars have the motors I want so its time to let these go. Im not sure what they are worth but I am open to both parting them out, selling one, or selling as a package deal. I am located in BOISE IDAHO. If you cant pick up from BOISE IDAHO then im sorry but the deal most likely wont work out. Please text 619-733-3691. I think 200 per motor is fair so Ill start my asking price at 400 for everything sr related I have.

 

First up is a Blacktop S13 Sr20det disassembled. It is long block only but taken apart due to piston failure. Block has no damage that i can find. No accessories included. 

 

S13 blacktop:

Block disassembled 

Pistons/Rods (pistons need replaced, rods look good so does crank and bearings. Looks to me like someone had a detonation issue)

Head is assembled

Flywheel and used clutch is there as well

Waterpump 

Valvecover

 

Second is an S14 Sr20de. This motor is mostly assembled but is missing accessories. The owner before me tried to pull the oil pump off (to sell because apparently S14 oil pumps are worth more than S13). He was apparently in a rush because he damaged the head gasket between the oil pump and head. I removed the head to replace the head gasket but HAVE NOT put it back together. This motor has intake manifold and exhaust manifold.

 

S14 Sr20de:

 

Block assembled

Head assembled

Intake manifold semi complete (no throttle body)

Exhaust manifold

Valvecover

Alternator

Flywheel and used clutch included

 

 

Also if someone is feeling real power needy i have a sr20det longblock fully built. Dyno'd 740WHP. The motor is built oil pan to valvecover. I want 2,200 for it.

  • Like 2

Share this post


Link to post

You need a price per forum rules... Could be a sweet deal.

 

GLWS.

Share this post


Link to post

Yes 400. I want them gone. I have too many motors in the shop haha. The s14 sr could be completed and installed fairly quickly. Pm responded to mydailyroutine, motors still avail!

Share this post


Link to post

Have wiring, ECU's etc..?

Share this post


Link to post

No, the wiring an ecu is worth more than my asking price. The long blocks are what's included.

Share this post


Link to post

PM sent

Share this post


Link to post

Just listed on craigslist for 400 so ill drop the price for ratsun members. 350 for it all, come and get it.

Share this post


Link to post
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.