WTB good L20 bottom end

[Eagle_Adam]

long story short:

 

found a "missing" bolt during the tear down 

 

turns out it wasnt missing...

 

and broke an easy out in it..

 

 

 

 

So , now im looking for options, if you have an L20 with a good bottom end im interested 

[tdaaj]

I've got a couple clean blocks, one z20 and one L20

[hang_510]

long story short:

 

and broke an easy out in it..

yep. :pirate:

wouldn't be surprised it if was the same bolt for me.

 

if you want to do an LZ, i have a Z24 bottom end and covers and chains avail

[Eomund]

How about drilling it out and re-tapping it?

[Eagle_Adam]

I've got a couple clean blocks, one z20 and one L20

 

Clean blocks as in good rings or clean blocks as is good cores to rebuild? 

 

yep. :pirate:

wouldn't be surprised it if was the same bolt for me.

 

if you want to do an LZ, i have a Z24 bottom end and covers and chains avail

 

It was a timing cover/water pump bolt on the pass side...... 

 

How about drilling it out and re-tapping it?

 

i got it sorted last night!!!

http://community.ratsun.net/topic/52622-round-2-fight-finally-found-the-right-one/page-18

[Eagle_Adam]

BUT!

 

 

 

Im still  looking for an L20 bottom end/motor that i can regasket and not have to mess with the bottom end internals. 

[Eagle_Adam]

BUMP 

[tdaaj]

Good clean blocks with no internals.

[jvb5577]

I have a block (U95 M2) but not sure how shipping will work. 

[blueghost510]

Put a nut over it, weld a bead or two on the inside remove the bolt.

[Eagle_Adam]

Put a nut over it, weld a bead or two on the inside remove the bolt.

 

 

I got it sorted last night!!!

http://community.ratsun.net/topic/52622-round-2-fight-finally-found-the-right-one/page-18

 

;) 

[AWSpoofwil]

i still got my block adam, FB message me or text me about it. ill sell it cheap just to get rid of it lol

[Eagle_Adam]

Didn't one of the cylinders have low compression?