Batsun.man Posted March 31, 2013 Report Share Posted March 31, 2013 I bought a 720 a month ago, a 1980 5-speed with only 77,xxx miles planning on lowering it 2" all around. I figure the best way would be blocks in the rear and I'm thinking I'll fab some spacers/blocks to go between the front lower control arms and torsion bars. Does anyone have some advice or ideas? Also I know I'll need a toe or camber alignment can I do this myself, if so how? Quote Link to comment
RedBanner Posted March 31, 2013 Report Share Posted March 31, 2013 The rear 4x4 springs will drop a 2 wheel drive pickup. The front is torsion bar, so adjust em down Quote Link to comment
datzenmike Posted March 31, 2013 Report Share Posted March 31, 2013 As wayno said.... loosen top one and turn both nuts up to lower. You should have the wheels off the ground. Lower and bounce the truck several times to equalize and measure the bumper height. . 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.