Rocket Dog Posted March 26, 2013 Report Share Posted March 26, 2013 Anybody got some...know how to make them? I got nuttin... 4 Link to comment
datzenmike Posted March 26, 2013 Report Share Posted March 26, 2013 Wrap a chain around the fuel pump and the rear exhaust pipe on the manifold. Lift in the middle Link to comment
DREWSDIME Posted March 27, 2013 Report Share Posted March 27, 2013 If your talking about the hooks for lifting the engine I have some extra from L series motors Link to comment
Rocket Dog Posted March 27, 2013 Author Report Share Posted March 27, 2013 If your talking about the hooks for lifting the engine I have some extra from L series motors Yup. Link to comment
DREWSDIME Posted March 27, 2013 Report Share Posted March 27, 2013 I have a few extra in the garage I will send some pics after my phones charges. Cover postage and you can have them 1 Link to comment
Rocket Dog Posted March 27, 2013 Author Report Share Posted March 27, 2013 I don't need no stinkin pics. :-) I'll PM my address and paypal you the postage. Thanks very much! Link to comment
4perrev Posted May 8, 2013 Report Share Posted May 8, 2013 I used a carabiner on the driver's side hook and bolt on the passanger's side next to the fuel pump. Then I used a cargo/tie down strap to attach both points on the engine. This may help. It's simple, but I could probably use an old motorcycle engine flat mount to bolt on. Link to comment
Dawa Posted May 8, 2013 Report Share Posted May 8, 2013 fsm refers to them as 'engine slingers' which i find pretty interesting. if you wanted you could make some yourself as long as you have a flat piece of steel and a way to cut it Link to comment
Recommended Posts