Janksun Posted February 21, 2013 Report Share Posted February 21, 2013 I need 3 brake adjusters for a 75 620! Or else I'm going to be stuck in Oregon for an eternity! I'm in seaside right now. I can maybe limp the truck to Portland. Text or call if you can help out (209)-483-0097 Link to comment
Draker Posted February 21, 2013 Report Share Posted February 21, 2013 You are probably gonna find more help in Portland honestly.. Or a Nissan dealer. Lots of 620's in the yards up here too! Link to comment
Eagle_Adam Posted February 21, 2013 Report Share Posted February 21, 2013 the adjusters are cleanable and fixable man!!! check out the build thread for my 74!!! Link to comment
Eagle_Adam Posted February 21, 2013 Report Share Posted February 21, 2013 half way down!! http://community.ratsun.net/topic/44897-eagle-adams-74-620-dd/page-2 Link to comment
izzo Posted February 21, 2013 Report Share Posted February 21, 2013 He went to les schwab and they didn't want to touch it, basically in case they broke anything. Went to the local mechanics, all three are locked up tight man! I asked the other datto guy here in town but he is all out of brake parts.... Anyone have a few adjusters laying around and can get here on the double? Rear cylinder too? Ill pitch in on gas monies Link to comment
Janksun Posted February 21, 2013 Author Report Share Posted February 21, 2013 I getting it all worked out! Thanks guys! Link to comment
Eagle_Adam Posted February 21, 2013 Report Share Posted February 21, 2013 DUDE!!!! CLEAN EM!!!!!!! they are saveable Link to comment
Janksun Posted February 21, 2013 Author Report Share Posted February 21, 2013 I am! Thanks Adam for that tip! 1 Link to comment
fivetenguy Posted February 21, 2013 Report Share Posted February 21, 2013 Get that truck down here man! I want to check it out. Link to comment
Eagle_Adam Posted February 21, 2013 Report Share Posted February 21, 2013 DUDE!!!! CLEAN EM!!!!!!! they are saveable I am! Thanks Adam for that tip! FINALLY!!!! i thought i was being ignored - make sure to use anti seize i promise you that when you are done with them they will be the easiest drum breaks to adjust on a datsun EVER! Link to comment
Janksun Posted February 21, 2013 Author Report Share Posted February 21, 2013 Haha it's ugly! Link to comment
Janksun Posted February 21, 2013 Author Report Share Posted February 21, 2013 Yes Adam I'm ignoring You because I don't like the way you yell at me over the interweb. Lol Jk after the new pads and a wheel cylinder arrive in an hour or so I should be able to roll out. Link to comment
Janksun Posted February 21, 2013 Author Report Share Posted February 21, 2013 I'll get some when I get back to the shop. Adam are you in Portland? Link to comment
Janksun Posted February 21, 2013 Author Report Share Posted February 21, 2013 I'm gonna be stopping at DTP's house if you wanna check out the truck. I hope to be there around 3 Link to comment
izzo Posted February 21, 2013 Report Share Posted February 21, 2013 Janksun just stopped by my work. The mechanic is going to bust the adjusters free, and replace a wheel cylinder. he should be on the road after that Link to comment
Eagle_Adam Posted February 21, 2013 Report Share Posted February 21, 2013 i work till 5, sry man Link to comment
Eagle_Adam Posted February 21, 2013 Report Share Posted February 21, 2013 ratsun to the rescue!!! Link to comment
Janksun Posted February 21, 2013 Author Report Share Posted February 21, 2013 Ratsun for life bro! Link to comment
Recommended Posts