72 Dime Posted December 30, 2012 Report Share Posted December 30, 2012 Looking for a price check on my current motor. Robello built z20 block bored to 2150. Head was just redone last year, maybe 200 miles on it. 44 mukinis nissan comp header nissan comp oil pan oil spray bar 280zx 5 speed lightened flywheel with kevlar clutch *have a spare long block just like it that needs to be rebuilt. Going to run a KA and would like to sell the complete setup to fund the swap. Motor is currently running in the car, though my fuel pump is acting up. Link to comment
jay123 Posted December 30, 2012 Report Share Posted December 30, 2012 Where are you? State? Link to comment
72 Dime Posted December 30, 2012 Author Report Share Posted December 30, 2012 I thought it showed on my name, Bay Area, California Link to comment
blueghost510 Posted December 30, 2012 Report Share Posted December 30, 2012 This is similar to The Price is Right 2500. Link to comment
72 Dime Posted December 30, 2012 Author Report Share Posted December 30, 2012 thanks for the advise on the filter (will not happen again) probably has about 200 miles on that filter. Link to comment
72240z Posted December 30, 2012 Report Share Posted December 30, 2012 4000 doll hairs Link to comment
SSS510 Posted December 31, 2012 Report Share Posted December 31, 2012 How about a video of the engine running and being revved up a bit, would help get someone exited and might help the sale; any idea how much HP it's making approximately?? Very Nice :thumbup: Link to comment
Silver04rs Posted December 31, 2012 Report Share Posted December 31, 2012 very cool!!! Link to comment
72 Dime Posted December 31, 2012 Author Report Share Posted December 31, 2012 thanks for the thread jack asshats, so much for a price check Link to comment
thisismatt Posted December 31, 2012 Report Share Posted December 31, 2012 thanks for the thread jack asshats, so much for a price check You're welcome for the good advice. Lawl Link to comment
72 Dime Posted December 31, 2012 Author Report Share Posted December 31, 2012 I changed my oil almost every 1000 miles, ive ran a lot of different filters, never had a problem. So what is the price check? Link to comment
72 Dime Posted December 31, 2012 Author Report Share Posted December 31, 2012 You're welcome for the good advice. Lawl Im welcome for your opinion Link to comment
datzenmike Posted December 31, 2012 Report Share Posted December 31, 2012 Corrections added. Looking for a price check on my current motor. Robello built z20 block bored to 2150. Do you know what was done inside to get 2150cc? What rod piston combination? Link to comment
72240z Posted December 31, 2012 Report Share Posted December 31, 2012 thanks for the thread jack asshats, so much for a price check What is this shopright? Its a for sale thread, rule #1 reads.. 1/ The item for sale MUST have a price on it. Auction style postings will not be tolerated. So list a price and w/e someone agrees to is what its worth, very easy. Link to comment
Ranman72 Posted December 31, 2012 Report Share Posted December 31, 2012 I thought it showed on my name, Bay Area, California it does not show up on Mobil devices but will on a home or laptop computer not sure what your motor is worth, what head is on it estimation on used motor 1500 Link to comment
72 Dime Posted December 31, 2012 Author Report Share Posted December 31, 2012 What is this shopright? Its a for sale thread, rule #1 reads.. 1/ The item for sale MUST have a price on it. Auction style postings will not be tolerated. So list a price and w/e someone agrees to is what its worth, very easy. No this is a price check thread. it if is in the wrong section, MOD please move. Every forum im on has a price check that people do before posting for sale to eliminate wild ass postings. IF that is not done here or not the community then I will delete and go about my merry way. Link to comment
72 Dime Posted December 31, 2012 Author Report Share Posted December 31, 2012 i know its a long rod, but as for the bore and stroke and what the rods/pistons are…. Rebello keeps those to himself. They are not publicized as to avoid other making the same engines and Dave no longer having a business. He did some head work last year, valve job, etc and stating that it is a head he did. Port and polish etc, and that the cam in there is the biggest they make for that motor. Thats about all i got out of him. Link to comment
datzenmike Posted December 31, 2012 Report Share Posted December 31, 2012 <p>Ah, I get the trade secrets. Well an 85mm bore block has an upper limit to how far it can be bored. You say long rod so that kind of limits a stroke increase. Z20E rods, Z22 pistons on Z20 crank and block. Nice. Well balanced high revving crank and rods with a slightly larger bore. Probably a U67 head Can you look between the #1 and #2 spark plugs...<br /> <br /> <img alt="710stuff010Large.jpg" src="http://i138.photobucket.com/albums/q251/datzenmike/L%20Z%20Heads%20and%20Motors/710stuff010Large.jpg" /></p> <p> </p> <p>A good rebuild will cost about $1,500 minimum... and that's if you supply the block and head. So buying a complete motor rebuilt and ready to go Probably $1,800. Then it needs a cam and valve train and an intake and multiple carbs, header likely... so another say $1,200 +. Say $3K ish.</p> <p> </p> <p> </p> <p>IE dizzy, alternator, zx 5 speed, starter, flywheel and clutch all extra.</p> <p> </p> <p> </p> <p> </p> Link to comment
defdes Posted December 31, 2012 Report Share Posted December 31, 2012 Rebello also uses a +2 mm Toyota rod on his race L18's wouldn't surprise me if the same was done here. Link to comment
SSS510 Posted January 1, 2013 Report Share Posted January 1, 2013 No this is a price check thread. it if is in the wrong section, MOD please move. Every forum im on has a price check that people do before posting for sale to eliminate wild ass postings. IF that is not done here or not the community then I will delete and go about my merry way. Yea ASSHAT!! you need to post on the PRICE CHECK thread; this is the FOR SALE thread :devil: . Link to comment
72240z Posted January 1, 2013 Report Share Posted January 1, 2013 "Datsun Parts For Sale" can be confusing... Link to comment
Recommended Posts