jun Posted December 23, 2012 Report Share Posted December 23, 2012 I pulled the head off my current Z project to have a look and hopefully get away with replacing the HG. But after some digging around, I found this. A crack in #4, circled in red, at the exhaust valve. Previous owner (a friend of mine) said the engine was down on power, suspected it wasn't running on all 6. I'm going to assume this could be one of the culprits. Also, this cyl was rusty, while the other 5 were not. What are my options? Is the head scrap, or can it be repaired? Would I be best off with a replacement? Quote Link to comment
ggzilla Posted December 23, 2012 Report Share Posted December 23, 2012 It can be repaired, but it is safer and less expensive to get a replacement head. Quote Link to comment
jun Posted December 27, 2012 Author Report Share Posted December 27, 2012 That's what I figured. I'll start looking, thanks! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.