A new addition to the family

[Datsunocaster 44]

Yes were do you find that and is it easy to use???

[dat521gatherer 604]

I got it on ebay after reading some random forums about redying plastic. It's super easy to put on I just used a foam pad. The two down falls are it can leave light streaks from the brush if you don't spread it evenly and it's more of a flat finish covering any shiny reflective plastic. But I think the trade off is worth it and with some practice the streaks are nonexistent.

 

After all the reading this article summed it up for me.

http://www.detailingspot.com/?page_id=21

 

I paid $12.90 and the stuff goes a long way.

http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313.TR12.TRC2.A0.H0.TRS0&_nkw=Forever+BLACK+&_sacat=0

 

A video I watched that was convincing.

[dat521gatherer 604]

I guess it does have a little shine to it.

[dat521gatherer 604]

 

 

[Tolkmod 204]

Looks freaking awesome, thanks for the links on that stuff!!

[dat521gatherer 604]

Does anyone know what the color code for this 75 b210 is? My sticker is gone.

[B2Fresh 228]

Does anyone know what the color code for this 75 b210 is? My sticker is gone.

I can find out for you tomorrow. I have the color book at work..

[B2Fresh 228]

Here is what I got for your year in Coles now it's a matter of which one is the correct color to your car.

[dat521gatherer 604]

Thanks B2Fresh but I'm not sure my color is on there. I'll post some other b210 pics with my color so I can get an eye for the repaints and non repaints.

[dat521gatherer 604]

I got my door card redone finally. It came out soso with a bubble here and a tear there and with a 6inch repair at the bottom from a donor panel. The first stuff I bought was too thick so i found some white board that worked although I still had to thin out the holes for the clips to fit.

 

[B2Fresh 228]

Looks good.. I couldn't even tell from the pictures posted..

I'll be bringing my panels for you to help me out with mine..

Lol

[dat521gatherer 604]

5 years later and I finally got to put a package tray in. The hardest part was finding this bracket.

 

 

Cleaned up the tray with some more forever black.

 

[angliagt 1,665]

                                   I have one of those parcel shelves - found it in a sedan at the local wreckers.

[dat521gatherer 604]

 

 

 

 

[Redrumls 134]

Looks like you deleted the ac? Did it work? I'm just wondering because my car is an ac car.

Greg

[dat521gatherer 604]

It didn't work so I tore it out. Kinda wish I didn't now.

[Redrumls 134]

I don't see too many b210 ac cars. Was just wondering.

Greg

[Dirtyowlnumber4 50]

Where would one find one of those air cleaners

[KELMO 1,992]

That looks to be a Webber (Weber, Hell I don't know) air filter.  I went back a page and it looks to also have a Webber carb.  Folks on here say Pierce Manifolds is the place to get real Webber stuff.

[Dirtyowlnumber4 50]

Awesome

[dat521gatherer 604]

Got the gx steering wheel a while back. I heard these came on all the hatchbacks and the 200sx first gen?

 

[dat521gatherer 604]

I pick up a better rear seat but when I took the old one out it went from easy swap to another project. I cleaned it up under there but cant seem to figure where the water is coming from to cause the rust spots with a hole of coarse.

 

 

 

 

 

 

 

[Bstock 8]

Hey there, I just picked up this little Datsun 210 last week and am just getting ready to change all the fluids and belts to keep it running as well as it is so far. I have a few projects in mind like replacing the old carpet, fixing a few rust spots and adding the decals. I hope I can get some good ideas for the direction to take when working on my car. 

 

I tried to post a picture directly but couldnt get it to work for the life of me. But here is a link to it:

 

https://www.instagram.com/p/BgKaIxKjtGZ/?taken-by=brandonstockton

[Bstock 8]

Here is my new little 210. I have a hand full of projects that i need to start working on but im excited to see what other owners are doing with theirs as well!

 

 

 

 

 

[dat521gatherer 604]

Yeah three months later. I don't have time or money for body work so I just took the rust down to bare metal and hit it with primer until it can be fixed properly.