Jump to content

81-2 720 diesel k/c parting out


Recommended Posts

located at

 

B-N-H Auto Wrecking · (360) 458-7938

17505 110th Ave SE · Yelm, wa 98597

 

Engine is considered to be a core (sd22)not locked up but needing a rebuild?, has a newer 5spd, sold as a set for $500

 

body has dents and dings, black and silver in color

 

has a core trans also, $75

will try to get pictures in a few days.

 

Ask for Kurt, tell'em Ted sent you. shipping may be available through me. the owner won't ship.

Link to comment
  • Replies 8
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

There is a DPC module(black electrical box) on the pass. side engine compartment near the wiper motor connected to the inner fender, it is about 3"X4", there is also another box above the pass. side speaker behind the tray below the glovebox, I would be interested in them parts. Most the time these get scraped. I would also like to know if it is a tilt column. Does it have power steering? wayno

Link to comment

There is a DPC module(black electrical box) on the pass. side engine compartment near the wiper motor connected to the inner fender, it is about 3"X4", there is also another box above the pass. side speaker behind the tray below the glovebox, I would be interested in them parts. Most the time these get scraped. I would also like to know if it is a tilt column. Does it have power steering? wayno

i believe it has p/s, not sure on the tilt, i can talk to him tomorrow or you can call him, open 9-5:30 tuesday-saterday

Link to comment

i believe it has p/s, not sure on the tilt, i can talk to him tomorrow or you can call him, open 9-5:30 tuesday-saterday

If it has the stock power steering I would be interested in all of them parts, but am unable to do anything about it till next saterday, if stock, the pump would be really low on the pass. side with an adjustment pulley right next to it, really low, right next to the oilpan. If the PS pump was up high, near the battery/valve cover, it would not be stock, and I already have that. I would be able to come up there next saterday at the soonest. Everything also depends on the prices, I don't need a engine, I already have a rebuilt one in my livingroom now. :blink:

Link to comment

If they are the DPC module and glow plug timer units without obvious damage i'll take them, the problem here is finding the time to get up there. I have so much going on, lot of people calling me wanting pressure washing done yesterday, i'll see what I can do, how long will the truck be there? wayno

Link to comment
  • 2 months later...
  • 3 weeks later...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.