L24 Block

[510can]

Hey guys,

 

Got a L24 block, just the short block with flat tops in it.

 

I just needed the head off of it for my L28, the L24 is out of a 240 we own, that has a 350 in it now, and the l24 does run.

 

Im located in Oceanside, CA

 

pretty much $50 bucks obo picks it up.

 

let me know, call text, when ever.

 

Mike

760 - 672 - 0671

mike.ski83@gmail.com

 

 

[510can]

No one wants a good engine block?

[Skib]

No one wants a good engine block?

 

 

L24's just arnt very desirable. Iv had one laying around for years.

 

 

its good for parts tho, the pistons are good to drop into an L16 (same bore) and if it has the 9mm bolt rods those are good for 3.1 strokers.

 

Flywheel will fit any L6 or an L20B and the front cover fits any L6 or L16/L18

[nismo dr]

Hey guys,

 

Got a L24 block, just the long block with flat tops in it.

 

I just needed the head off of it for my L28

 

 

 

that would be a short block, long block includes head

[510can]

that would be a short block, long block includes head

 

Fixed :), thanks for the correction.

[510can]

L24's just arnt very desirable. Iv had one laying around for years.

 

 

its good for parts tho, the pistons are good to drop into an L16 (same bore) and if it has the 9mm bolt rods those are good for 3.1 strokers.

 

Flywheel will fit any L6 or an L20B and the front cover fits any L6 or L16/L18

 

This is really good info :)...

 

Unfortunately I have no use for L series blocks, since Im going to be using a KA in the 510, and eventually the 280zx is going under the knife probably for a 350 swap also.

 

Just an FYI cause I forgot to mention in my original post. All the peripherals are included with the block.