Jump to content
Icehouse

CAN/AM Production easy wiring boxes for EFI works for KA's SR's VG's CA's and more

Recommended Posts

CAN/AM Power Products box's

The CAN/AM boxes that Rob and I designed and built make wiring newer EFI Nissan engines into our old Datto's, or any cars for that matter, much simpler. These boxes take the place of the point to point wiring that would normally be done by us "do it yourselfers." Making the wiring easier for the new to wiring guys by following the drawings, which are also under construction. Using this box cuts HOURS out of the EFI wiring as well, I've wired countless Nissan engines and from now on I'm going to use these boxes. SO SO much faster and cleaner. Use this link to see how it works with each engine.


By hooking up a constant power to the box from the battery then connecting the 15 or less screw terminals your done! Then when it comes time to trouble shoot there are 6 leds, 3 that let you know if the fuses are bad and then 3 that turn on with the relays.


There are a few fully assembled. We made a limited run, hopefully they will sell so we can keep making them. Soon I will have all the wiring charts in the how to section to work with every motor. 150 bucks and well worth it, I will ship it for free if you live in the lower 48.


2011-01-22_20-27-31_70.jpg



2011-01-22_20-27-45_128.jpg




2011-01-22_20-27-08_566.jpg

  • Like 8

Share this post


Link to post

Ive been hearing about these for a while now and dammit they look great buddy!!! one day I will have a need for this one day soon ;)

  • Like 1

Share this post


Link to post

Lead time is now a little over a week.

  • Like 1

Share this post


Link to post

Sooooo... everything is marked all ready i can see? So you just insert the correct wires to the correct spot and your ka is ready to go????? Fuck man... Honestly that is fucken sick... I will so buy one if that is correct.

  • Like 1

Share this post


Link to post
Guest DatsuNoob

SHIT! OIC FAIIL on work comp. Looking forward to seeing one in person next weekend. :)

Share this post


Link to post

Dude, Jeff. Where the fuck were ya like 2 years ago with this shit, slacker! Jesus! thats a bad ass little setup. ya should do a 4 pod one too so you can hook up a electric fan.

  • Like 2

Share this post


Link to post

I'll probably grab one of these from you in a couple of weeks! I'm running out of money FAST!

  • Like 1

Share this post


Link to post

This most likely is a stupid question but what does it do?

Is some sort of engine management?

Or does it just make wiring simpler?

  • Like 1

Share this post


Link to post

This most likely is a stupid question but what does it do?

Is some sort of engine management?

Or does it just make wiring simpler?

 

 

For KA/SR swaps. Keeps the wiring & relays clean. Just attach wires, done...

  • Like 1

Share this post


Link to post

CAN/AM

trademark infringment

 

I cant open file to see photo.I think youll sell alot of these. Most will never be used but youll sell alot of these!

Austrailia baby thats where its at!!!!!!!!!!!

  • Like 1

Share this post


Link to post

Wonder if this will help simplify the wiring on my VQ510

Will have to see how the wires are ran.

I know there's fuel pump relay that's just hanging :lol:

  • Like 1

Share this post


Link to post

Not enough information about these for me to dive in. How does it connect, what exactly is it? blah blah.

 

There is no actual description.

  • Like 1

Share this post


Link to post

Laecoan,

 

u mount this under the dash. normally you would wire up yourself the fuel pump relay, the computer, and whatever else when doing a ka/sr swap. this is just a better way of doing it.

 

i think ka-510 has a picture of what the wiring would look like without this, he did a good job, but this is still x10

 

 

Found it!

 

This is basically what it would replace

 

IMG_3259.jpg

  • Like 1

Share this post


Link to post

Sorry guys I need to update and add a better description. I was just stocked that one was soldered together, so I wanted to share my enthusiasm. Since when I update the wiring thread it doesn't actually bring it back to the top. So I decided to post it up here in the classifieds. Well By the time I got it soldered, photo's uploaded and the thread going I was a little to drunk to put the effort required to write a half way good description. Tonight I will update this thread sorry guys. Just got a bit ahead of my self. (Even though it took me and Rob 2 years to get this done :) )

  • Like 1

Share this post


Link to post

Dude, Jeff. Where the fuck were ya like 2 years ago with this shit, slacker! Jesus! thats a bad ass little setup. ya should do a 4 pod one too so you can hook up a electric fan.

 

Ha he was workin these two years ago I think! Took long enough Jeff! :lol: But totally looks worth it dude! Congrats on getting it done! You deserve celebrating!

  • Like 1

Share this post


Link to post

Sooooo... everything is marked all ready i can see? So you just insert the correct wires to the correct spot and your ka is ready to go????? Fuck man... Honestly that is fucken sick... I will so buy one if that is correct.

 

Yep each screw terminal is labeled, connect it to the correct wire and your done :) After installing our prototypes I was SOLD! They make the job so damn nice, easy and clean.

 

 

 

Dude, Jeff. Where the fuck were ya like 2 years ago with this shit, slacker! Jesus! thats a bad ass little setup. ya should do a 4 pod one too so you can hook up a electric fan.

 

haha Get one for your next project :)

 

 

I'll probably grab one of these from you in a couple of weeks! I'm running out of money FAST!

 

Do it, just make sure your engine is in the link, if not send me the wiring diagram and I will figure it out :)

 

 

Pardon my ignorance but is this a relay box? And does it come with a cover?

 

 

There is NO cover, the relays are very tall, we played around with a cover but it just ended up looking weird. This way you can see the LED's better to :)

 

 

 

Ordering info, please!

 

 

The case order is slowing us down big time. When they are finally assembled I will add the Paypal info to the original post :)

 

 

 

2eDeYe' date='24 January 2011 - 07:21 AM' timestamp='1295882477' post='415852']

I'll take one.

 

 

I'll bring one up when we finish your wiring :)

  • Like 1

Share this post


Link to post

will this work with a s14 sr and a s15 6 speed?

 

 

Tranny doesn't matter, so yes, well I haven't written up the S14 SR diagram but it's on my list :)

 

 

 

 

This most likely is a stupid question but what does it do? Is some sort of engine management?Or does it just make wiring simpler?

 

 

Just simpler and cleaner wiring, just a relay box. Our main intent was to just make it so anyone with a bit of wiring knowledge can make there engine run and the wiring look clean.

 

 

 

For KA/SR swaps. Keeps the wiring & relays clean. Just attach wires, done...

 

Exactly!

 

 

CAN/AM trademark infringmentI cant open file to see photo.I think youll sell alot of these. Most will never be used but youll sell alot of these!Austrailia baby thats where its at!!!!!!!!!!!

 

 

Well Rob's Canadian and American so we just went with it :)

 

 

 

Wonder if this will help simplify the wiring on my VQ510Will have to see how the wires are ran.I know there's fuel pump relay that's just hanging :lol:

 

 

I've never looked at a VQ diagram but it may :)

 

 

Not enough information about these for me to dive in. How does it connect, what exactly is it? blah blah.There is no actual description.

 

 

 

As I explained in the previous post I've was slacking, I meant to come back to it the next day but got sidetrack. Really didn't expect much response to be honest :)

 

 

 

Laecoan, u mount this under the dash. normally you would wire up yourself the fuel pump relay, the computer, and whatever else when doing a ka/sr swap. this is just a better way of doing it.i think ka-510 has a picture of what the wiring would look like without this, he did a good job, but this is still x10Found it!This is basically what it would replaceIMG_3259.jpg

 

 

Yep!

 

 

Ha he was workin these two years ago I think! Took long enough Jeff! :lol: But totally looks worth it dude! Congrats on getting it done! You deserve celebrating!

 

Yeah Rob and I put countless hours of time into these. It's funny holding it, thinking damn all this work for rusty old Datsun's :)

  • Like 3

Share this post


Link to post

×

Important Information

By using this site, you agree to our Terms of Use.