Jump to content

My Swiss 1972 S30 240Z rebuild project


Recommended Posts

  • Replies 698
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Just another of these little things that sum up in a lot of time and money, but another little step is done: The inside uf the fuel filler cap - the fuel pipe mounting plate (or whatever you want to call it) is sandblasted and welded back in the car. Will visit the bodyshop on friday and have a closer look at those details:
WhatsApp-Image-2018-09-10-at-16.24.12-Ko

 

WhatsApp-Image-2018-09-10-at-16.24.48-Ko

 

Oh and at the japanese classic car meet in Rhotrist last week, i got this german Datsun Book from my Buddy Stefan. Thanks for bringig it along ? Haven't looked inside yet, so i'm curious how it is ?
P1200815-Kopie.jpg

Link to comment

Had a visit at the Bodyshop today to discuss some next steps. Then i realized you guys haven't seen the car as a whole in a while, so i made some pictures. only to find out back at home that the camera settings were wrong and all the pictures were blurry. Nevertheless. here are some (blurry) pictures of the car in it's current state. Next up will be the work on the floorpans ?
P1200831-Kopie.jpg

P1200833-Kopie.jpg

P1200835-Kopie.jpg

Link to comment
5 hours ago, docbainey said:

Wow, this is crazy! Just scanned thru your thread. You've been at this for what, seven years or so? Very cool, keep it up!!!!

Yeah it's definitely seven years now at least, and it will pretty sure take up some more years.
At the end it was always just more of a project to keep myself entertained and learn something, rather than just a fast car build to drive it. I enjoy the work on the car as much as i enjoy driving my other ones - And once this will (will it ever?) be completed, im sure there will be some kind of "hole" in my life. God thanks we all know a project like this is never really finnished, even when it runs and all, you allways need to tinker a bit on these classics. and there's allways the hunt for some special and rare part ?
Now even started to build a home for the Car (including workshop, parts storage, workshop-lift, etc..) and ourselves, so in future hopefully work will go a bit easier and faster, when all the cars, tools, parts and spares are in one area, just below our home ?
P1200856-Kopie.jpg

  • Like 1
Link to comment
  • 2 months later...

Got some stuff today which i found lately for sale online.
First a set of original Nissan Parts manual Microfiches from a German workshop liquidation. So it's the european Parts manual. Unfortunately one page (body) is missing, but since i have a digital copy already it's only for completeness sake. and the price was great too ?

P1220312-Kopie.jpg
 

You would usually need a microfilm / microfiche reader, but i think a scanner with a high resolution should be able to handle those too. I will give it a try. It just was a too cool piece of history to not buy them ?
P1220314-Kopie.jpg
 

Then i got a copy from an original German User manual for the 240Z:
P1220317-Kopie.jpg
 

The colours are wrong since the seller seems to sell a lot of copied manuals with all the same colour sheme for some reason, but still it's better than nothing and it was a lot cheaper than an original, old, brittly, used service manual that is currently for sale for 130 Bucks on ebay. So i decided a copy has to do it. Also i know the original colour sheme anyway, so i can  create my own copy with th e original colours whenever i want to:
s-l1600-Kopie.jpg
 

It's good to finally know all the details:
P1220318-Kopie.jpg
 

And it got a wiring shematic too, which is great ?
P1220316-Kopie.jpg
 

More parts are on the way, so expect more by next week or so ?

Link to comment

Well, the workload on the house / Garage / Workshop project finally slows down a bit, so i have a bit of time and a few bucks here and there to spend on my other, car related projects again. I have found some missing parts which are currently on the way to me, which i will of course post once they're here. But first i got some parts today from my Buddy Stefan at Cagedude.

P1220263-Kopie.jpg
 

Ag ain he was responsible for recreating some damaged parts with his awesome fabrication skills. This time he built me set of 240Z vertical Grille finns, which hold the horizontal fins together. As you can see my original set (black) was totally bent and broken. Super happy and i will have to reassemble my grill soon i guess ?

P1220264-Kopie.jpg
 

Link to comment

So since i have all my parts from the grille together now i thought it's time to puzzle them together. So here we got t he single pieces:
P1220319-Kopie.jpg
 

First test assembly (works nice with a cushion below). Looks a bit out of shape:
P1220320-Kopie.jpg
 

Realized that the double-fin on top still has a major dent at where one of the vertical pieces attach:
P1220323-Kopie.jpg
 

Tried my best hammering skills to get it sort-of straight again:
P1220324-Kopie.jpg
 

Second test-assembly. Starts to look nice.
Need to sand the edges a bit on the vertacal pieces and then will replace all the rivets, before i put it all back together with new bolts and nuts ?
P1220325-Kopie.jpg

  • Like 1
Link to comment

Today i got one of my ebay ad finds: The plastic radiator surrounding Panel / shroud. It's a bit rough around the edges, has a lot of black paint stains, but overall it's in great shape and the price was too good to not buy it. Another missing part of the puzzle in storage ?
DSC_2797-Kopie.jpg

And had to give it a clean immediately before i put it in storage ?
DSC_2799-Kopie.jpg

Much better already. Not sure if i will use it anyway, since i have the Koyo radiator. But it was only a few bucks and it's good to know i have all the OEM Pieces to put it together back in original condition if i ever want to. Better get those items now before prices rise further ?
DSC_2800-Kopie.jpg

Link to comment

While strolling the webs for good parts deals i stumbled upon this:  A  Niles Cigarette lighter with a built-in Thermometer. It's so useless and so japanese in a way, i couldn't resist. It was only a few bucks and i found it in greece of all countries:
P1220345-Kopie.jpg

 

Btw: Niles is the company that made most of the electronic relays and switches in the 240Z and many other Datsuns / Nissans of that time. So while this item was never sold by Nissan, it somehow gives the whole thing a bit of a period correct OEM feel:
P1220346-Kopie.jpg

 

And to be honest, it's so weird and odd, i just had to have it.
P1220347-Kopie.jpg

  • Like 5
Link to comment

While browsing the web for a few nice deals, i stumbled upon something which finally arrived at my door today. A huge Datsun 240Z Banner / Flag with a nice Japanese theme, showing some Cherry blossoms and snowy montains along with japanese characters (still need to translate them). 
P1220394-Kopie.jpg

A german dealer who sold it on ebay ads told me he bought it at an oldtimer swapmeet in the Netherlands. A bit of research revelealed that the graphics once were made for a 30 year celebration by an insurrance company called Carole Nash. The original wallpaper is still available for download on their website: https://www.carolenash.com/insideclassics/classic-car-news/carole-nash-celebrates-beauty-classic-design-global-classics/

datsun-240z-poster-Kopie.jpg

 

Well. not sure how it ended up on a flag in netherlands. But i'm more than happy to have it decorating my soon-to-be-finnished Garage, where the 240Z will go ?

Link to comment
  • 2 weeks later...

Upon closer inspection of the grille, i realized the already some rust has appeared at the places where matal rubs on metal:
P1220457-Kopie.jpg
 

So i decided to better have all the non-aluminum pieces completely disassembled and zinc plated. That's why i remoced all the rivets
P1220454-Kopie.jpg

P1220456-Kopie.jpg
 

While doing so, i decided to redrill some of the rivet holes:
P1220327-Kopie.jpg
 

Will have to strip the primer, hammer a few small dents straight and then have it zinc plated with the next load of parts...

Link to comment
  • 2 weeks later...

While having all the grille pieces disassembled, i thought i better take advantage of it and straighten all the pieces before i have them zinc-plated.
So i pulled out my best (nonexistant) panel-beater skills and hammered the parts as straight as i could. A few examples:

Before:
DSC_2873-Kopie.jpg
 

After:
DSC_2874-Kopie.jpg

Before:
DSC_2875-Kopie.jpg
 

After:
DSC_2876-Kopie.jpg
 

Before:
DSC_2877-Kopie.jpg
 

After:
DSC_2878-Kopie.jpg.

  • Like 1
Link to comment
  • 3 weeks later...

I randomly seem to stumble on nice stuff by accident. I always dreamed about triple Mikunis for my Z, but i always felt in the current situation with the house going on i save them for buying them later, even with rapidly rising prices. Then one day i accidently came accross these nice carbs for sale on an Austrian ads website. A bit of negotiation, a payment and they arrived here today:
P1220580-Kopie.jpg
 

They are genuine japan made Mikuni (Solex) PHH40 S5 (5-screw) carbs. You might wonder why PHH40? I don't plan to run any crazy numbers, so the PHH40 should be nice with my calculations. we'll see. i think i can swap them for PHH44 when i figure out that i was wrong in future. The deal was too god to say now. it was a once in a lifetime opportunity.

P1220587-Kopie.jpg
 

They have been beautifully restored. Probably will zinc plate all the bolts but not sure yet:
P1220583-Kopie.jpg
 

It even gets better: They're fully restored, and came with a free set of intake side gaskets and beautiful velocity stacks.
P1220582-Kopie.jpg
 

After all i'm very happy with my purchase and i think my engine setup comes along nicely with the FET Intake manifold and the Kakimoto valve cover. The whole engine side of things is still on a bit on hold, but when i find good parts like this, i just have to save them for the future ?
P1220586-Kopie.jpg

  • Like 1
Link to comment
  • 2 weeks later...

I haven't got much to show you honestly. The House / Workshop / Garage build is coming along nicely and keeps me distracted from the car projects. And that for at least another 6 months. And the panelbeater is recovering from a broken nose and i'snt able to work at the moment.
However This saturday was a milestone in that: I went to check out some potential new garage lifts. The grey one is actually my favourite so far:
DSC_2918-Kopie.jpg
 

However i felt like i HAVE to do something for the cars every now and then. so i decided to take apart the FET intake manifold. so i can have the parts cleaned and replated with my next load. Before:
P1220705-Kopie.jpg
 

During
P1220706-Kopie.jpg
 

And after. It surely does look good in my opinion ? Will be even better once it's blasted, cleaned and all the parts are plated and back into position...
P1220707-Kopie.jpg

Link to comment

I haven't got much to show you honestly. The House / Workshop / Garage build is coming along nicely and keeps me distracted from the car projects. And that for at least another 6 months. And the panelbeater is recovering from a broken nose and i'snt able to work at the moment.
However This saturday was a milestone in that: I went to check out some potential new garage lifts. The grey one is actually my favourite so far:
DSC_2918-Kopie.jpg
 

However i felt like i HAVE to do something for the cars every now and then. so i decided to take apart the FET intake manifold. so i can have the parts cleaned and replated with my next load. Before:
P1220705-Kopie.jpg
 

During
P1220706-Kopie.jpg
 

And after. It surely does look good in my opinion ? Will be even better once it's blasted, cleaned and all the parts are plated and back into position...
P1220707-Kopie.jpg

Link to comment

It seems like currently nice parts are looking for me, rather then i'm looking for them ?
But lets start at the beginning. The garage-build is coming along nicely, with temporary lighting now installed:
P1220761-Kopie.jpg

 

With the House-build as a first priority now, i don't look for parts atm. But then (as with the mikuni's i bought lately) something popped up for a great price which has been on my shopping list for quite a while: A NOS splash under guard panel, which arrived today:
P1220806-Kopie.jpg

 

I think now i have officially all the body panels together, including the "optional" parts, or parts that are, say, more functional than visible. This will prevent the engine bay from getting too dirty and wet. Since these panels are prone to stone chips, most of them are quite dented and rusty, or completely missing (as it was on both of my cars), so it's rare to come along a nice piece like this one. And for a reasonable price that too..
P1220807-Kopie.jpg

 

The seller in Hungary was also nice enough to add a free set of what i assume are reproduction Datsun / Nissan colour code stickers. I need to investigate further on these. Paint is still far away in my project so i haven't spent too much time investigating on all those small details like stickers. But i absolutely love them. Thanks a lot for those!
P1220808-Kopie.jpg

  • Like 2
Link to comment
  • 1 month later...

This all started with a friend who was asking for my help to import some strut tower braces for an MX-5 for one of his friends. So i made an offer. Then he decided to add some small pieces for himself for his Kenmeri Skyline build. And when i realized i had to order bits and pieces from shops like rubber-soul, M-Speed, RS-Start and Revive Jalopy, i decided it couldn't be wrong to add a few bits and pieces for my own 240Z project. That's when another friend of ours stepped in and was asking for some Parts for his Hakosuka build. So today i finally got the big order of small bits and pieces from Japan.
These were the parts for me:
Rubber soul / NGK blue spark plug wires, that will fit my colour theme perfectly:
P1230436-Kopie.jpg
 

Some rubber trunk lid / hatch stoppers
P1230502-Kopie.jpg
 

a Factory R160 / R180 / R200 Differential Service manual
P1230440-Kopie.jpg
 

P1230441-Kopie.jpg
 

Window wiper boots:
P1230438-Kopie.jpg
 

Windscreen washer nozzles:
P1230437-Kopie.jpg
 

rear drum cylinder rubbers:
P1230505-Kopie.jpg
 

And a free rubber soul calendar
P1230489-Kopie.jpg
 

And some free catalogues:
P1230490-Kopie.jpg
 

And then the KGC10 Hakosuka Skyline GT parts:
P1230497-Kopie.jpg
 

P1230496-Kopie.jpg
 

P1230494-Kopie.jpg
 

P1230501-Kopie.jpg
 

P1230493-Kopie.jpg
 

P1230492-Kopie.jpg
 

And then some Kenmeri / Yonmeri Skyline GC110 parts:
P1230491-Kopie.jpg
 

P1230506-Kopie.jpg
 

P1230503-Kopie.jpg
 

P1230504-Kopie.jpg
 

P1230498-Kopie.jpg
 

P1230499-Kopie.jpg
 

P1230500-Kopie.jpg
 

P1230495-Kopie.jpg
 

P1230507-Kopie.jpg
 

P1230436-Kopie.jpg

  • Like 2
Link to comment
  • 1 month later...

Nothing big, but finally something car related again 🙂 I recently got contacted by a nice guy in Czechia who just made sets of OEM reproduction stickers for all those inspection and small supplier stickers which will need replacement when the car is done for the people who know. Got them today. From the first sight they seem pretty nice with those glossy finnish, etc. But will compare them at another point. Nevertheless. something to keep the project alive. Also bought some more stuff which should arrive here by next week or so.
P1240111-Kopie.jpg

  • Like 2
Link to comment

Well my bodyshop is an excellent guy, but he surely takes his time to get all the details right. I love that, but i want my car back before i retire. That's why i always search for the best possible solution to make life as easy as possible for  him. Lately i often saw those yellow panels from UK popping up on various sites. One of the "problematic" areas is stil the Rear lower valance. I got one from MSA so far and it's ok for most of the "american" restaurations i guess, but not for me... The main problem beeing that the Curvature from the original lower valance is missing. I thought i'd give it a try and got it today:

P1240160-Kopie.jpg
 

I'm surprised about how different it is and how great it looks. Also got confirmed that it's the original sheet metal thickness as the cars came with. You can clearly see the "curvature" in this picture.
P1240162-Kopie.jpg
 

The main difference aside from that is the "lip" at the bottom end (see first picture) and the more accurate shape at the exhaust area.
P1240163-Kopie.jpg
 

Here's panel from MSA, see the differences? All a bout the details..
P1160908-Kopie.jpg
 

I really can recommand the yellow one above. They don't have a website but i often see these (and many other 240Z parts from them) pop up on ebay and various facebook pages. Price is also nice if you ask me 🙂
P1240161-Kopie.jpg

  • Like 2
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.