Datsun Parts Posted October 20, 2010 Report Share Posted October 20, 2010 I have these in stock too. On ebay now for $650.00, free shipping for Ratsun members. http://cgi.ebay.com/ebaymotors/Datsun-620-Pick-Up-Truck-Front-Disc-Brake-Conversion-/400165590632?pt=Motors_Car_Truck_Parts_Accessories&hash=item5d2bba5668 Quote Link to comment
wildmaninid Posted October 20, 2010 Report Share Posted October 20, 2010 Are these for a 510 or a 620? Conflicting auction information you have going on there. A lot on the spendy side but glws. Bill Quote Link to comment
ariascarlos1990 Posted October 20, 2010 Report Share Posted October 20, 2010 appear to be 620 "Datsun 620 Pick Up Truck Front Disc Brake Conversion" and being 6 lug. Quote Link to comment
BEEBANI Posted October 20, 2010 Report Share Posted October 20, 2010 Those are my brackets, Al is able to offer the complete setup for people who don't want to search for all the components. Quote Link to comment
wildmaninid Posted October 21, 2010 Report Share Posted October 21, 2010 Looks like he bird dog' all the appropriate parts for the conversion, but I did too and spent under 80 bucks, for front and rear conversion at the recycler yard. Awesome brackets!! Quote Link to comment
Jinxed Posted October 29, 2010 Report Share Posted October 29, 2010 I have these in stock too. On ebay now for $650.00, free shipping for Ratsun members. http://cgi.ebay.com/...=item5d2bba5668 I am new at this site, and I was wondering if any possibility that I could just purchase the brackets, for my '73 Datsun 620? It's been difficult to keep the drum brakes adjusting it properly. 1 Quote Link to comment
yello620 Posted October 29, 2010 Report Share Posted October 29, 2010 The brackets are availabe separately, PM Beebani Quote Link to comment
Jinxed Posted October 29, 2010 Report Share Posted October 29, 2010 The brackets are availabe separately, PM Beebani Thanks; PM sent..... Quote Link to comment
herculesinwyoming Posted October 30, 2010 Report Share Posted October 30, 2010 i will be wanting the front and rear brackets, just may be a while before i can afford them. Quote Link to comment
Braden Posted October 30, 2010 Report Share Posted October 30, 2010 i will be wanting the front and rear brackets, just may be a while before i can afford them. NO SHIT!!! 1 Quote Link to comment
herculesinwyoming Posted November 2, 2010 Report Share Posted November 2, 2010 IF i were only single with no kids. graduation for my oldest this year, so lots of stuff to get done and none of it is cheap. Quote Link to comment
Jinxed Posted November 2, 2010 Report Share Posted November 2, 2010 IF i were only single with no kids. graduation for my oldest this year, so lots of stuff to get done and none of it is cheap. Thats just being a man, taking some responsibilty to the family, Good Job. I am glad some of us still out there. My Kid is already in College, scholarship and all, thank god she is independent. 1 Quote Link to comment
Jinxed Posted November 14, 2010 Report Share Posted November 14, 2010 Got the brackets from beebani Thursday, and I finnally got it on, today, everything work out great, everything went like clockwork, it took me couple of hours but took I my time, doing it right. Great feel on the brakes now, and I think I am gonna stay with the same Master Cylinder (3/4) for now. Next will be the rear probably in a couple of months............ Quote Link to comment
Braden Posted November 14, 2010 Report Share Posted November 14, 2010 Got the brackets from beebani Thursday, and I finnally got it on, today, everything work out great, everything went like clockwork, it took me couple of hours but took I my time, doing it right. Great feel on the brakes now, and I think I am gonna stay with the same Master Cylinder (3/4) for now. Next will be the rear probably in a couple of months............ how much better did the brakes work for you percentage wis?e ex. they worked 50% better or 110% better. im so sick of drums, disc is a dream of mine. 1 Quote Link to comment
Jinxed Posted November 14, 2010 Report Share Posted November 14, 2010 how much better did the brakes work for you percentage wis?e ex. they worked 50% better or 110% better. im so sick of drums, disc is a dream of mine. I would say about 110% better, I was just sick of adjusting it every six months and would not get it right, it's either pull to the right or left, and the traffic around here are just crazy, I have been looking around for a while now on trying to get a disc brake on the front, but it's either cost an arm and leg or you have to fabricate something........I am so glad that I run into this site. I am so stoke to drive it down the road on my first test. I felt I have a different truck. Thanks to Beebani's hard work..... The next thing is upgrade the steering a bit........ Quote Link to comment
villegs Posted November 16, 2010 Report Share Posted November 16, 2010 Beebani has 2 sets up on ebay atm, one using 300zx calipers the other, Pathfinder calipers i think.The pathfinder sets notes 15' wheels are needed, is this so with the 300zx set too, no notations on the auction? Quote Link to comment
BEEBANI Posted November 18, 2010 Report Share Posted November 18, 2010 they both require a 15" or bigger wheel Quote Link to comment
krecs Posted December 30, 2010 Report Share Posted December 30, 2010 I am new at this site, and I was wondering if any possibility that I could just purchase the brackets, for my '73 Datsun 620? It's been difficult to keep the drum brakes adjusting it properly. hey do you want steel or aluminum to use pathfinder calipers or 300zx 4 piston aluminum calipers i make both brackets here in socal Quote Link to comment
mklotz70 Posted April 4, 2011 Report Share Posted April 4, 2011 I do brake kits too....mine fit behind 14's :) 1 Quote Link to comment
NiMB Posted June 11, 2011 Report Share Posted June 11, 2011 Do you sell just the bracket? I have everything else already just need the bracket. Quote Link to comment
mklotz70 Posted June 11, 2011 Report Share Posted June 11, 2011 go to the previous page and find the first post in the thread by Beebani....then contact him. :) Quote Link to comment
NiMB Posted June 11, 2011 Report Share Posted June 11, 2011 go to the previous page and find the first post in the thread by Beebani....then contact him. :) Thanks, I PM him and I also contacted the guy who sells the kit. Question, It seems some late 77 620s came with disc brakes. Rockauto.com sells the parts, could I just use those (rotor, caliper, etc.)? If so what would all be required? I opened a thread about this specifically: http://community.ratsun.net/topic/32597-77-620-front-disc-brakes/page__p__492099__fromsearch__1#entry492099 Any help would be... well... helpful. Thanks in advance. Quote Link to comment
Nizzospeed Posted April 6, 2015 Report Share Posted April 6, 2015 hey guys, im trying to get some input on doing a 300zx full brake hub assembly swap onto my 84 720, anyone ever done it before... if so how big of a pain would it be Quote Link to comment
Nizzospeed Posted April 6, 2015 Report Share Posted April 6, 2015 i mainly want to do it for the lug pattern, sick of the 6 lug Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.