paradoxx Posted January 8, 2008 Report Share Posted January 8, 2008 Ive just recently 2 hours ago, assembled my engine, because I overhauled it, and I was doing it with the video that Hainz did. The thing is: I have the cam sprocket set on #2 on the thrust plate, the first silver link of the chain on the #2 mark. The v nodge and the dash aligned. Down below on the crank sprocket, the next silver link on the dot. The cylinder at its maximum height. I have the timing pointer on the crank pulley at the far left nodge but the cam sprocket v nodge and dash is slightly to the right of the dash. Something like this: _ .v If I put the middle crank pulley mark on the pointer, the cam sprocket v nodge and dash are perfectly aligned. Please dismiss this thread, Ive missed 5 seconds of the Hainz video where he explains this. :D :rollseyes: Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.