sycloned916 Posted December 22, 2010 Author Report Share Posted December 22, 2010 you shouuld get some S15 injectors and up the boost to like 15 psi ;) them 370s wont hold much more then 10lbs iirc Might just do that,but 15psi not yet till I build another motor with some goodies. I'll get some pics of the DP tomorrow. Quote Link to comment
sycloned916 Posted December 22, 2010 Author Report Share Posted December 22, 2010 all hrs of work shows this is bad ass I couldn't count how many Hrs I have in it but afew. Thanks! Quote Link to comment
sycloned916 Posted December 22, 2010 Author Report Share Posted December 22, 2010 . SWEET ! SWEET ! SWEET ! Thanks! Your truck is Nice Too! Quote Link to comment
lynchfourtwenty Posted December 22, 2010 Report Share Posted December 22, 2010 Might just do that,but 15psi not yet till I build another motor with some goodies. I'll get some pics of the DP tomorrow. stock blocks can take 400+whp lol but i hear ya ;) Quote Link to comment
wayno Posted December 22, 2010 Report Share Posted December 22, 2010 I was staring at this picture for like 5 minutes, this truck is awesome the way it is, but I cannot help but wonder what it would look like if the intercooler was custom made to the shape of the grill and inner high beam lights combined and put there. But I suspect that it would interfere with the cooling of the engine putting that hot cooler in front of the radiator. I also wonder what it would look like with the larger headlights of the 66 charlie69 refered to, can anyone photo shop the cooler between the headlights? wayno Quote Link to comment
sycloned916 Posted December 23, 2010 Author Report Share Posted December 23, 2010 Some Pictures of the down pipe and exhaust. I also have a Video of it Running! Quote Link to comment
lynchfourtwenty Posted December 23, 2010 Report Share Posted December 23, 2010 ya u crammed that thing in there didnt ya :) thanks for the pics Quote Link to comment
sycloned916 Posted December 24, 2010 Author Report Share Posted December 24, 2010 http://www.youtube.com/watch?v=etFi1NB8A-A Quote Link to comment
lynchfourtwenty Posted December 24, 2010 Report Share Posted December 24, 2010 did u make that dp? Quote Link to comment
sycloned916 Posted December 24, 2010 Author Report Share Posted December 24, 2010 did u make that dp? Ya,It's only 2.5in I wanted 3in. but it looked funny the way the bends were looking and how I wanted it. I dont mind trying it with 3in later. The DP and the exhaust mani, turbo housing will get powered coated with hi-temp soon. Quote Link to comment
67 411 Posted December 28, 2010 Report Share Posted December 28, 2010 Man i just read through your whole thread, I am in love with your truck. It is the most intimadating datsun i hve ever seen!! I love all the pics and videos, it is really inspireing to see a truck like yours. I cant wait to see more of this build, you do great work. Quote Link to comment
burrito213 Posted December 28, 2010 Report Share Posted December 28, 2010 i agree with 67 411. Quote Link to comment
sycloned916 Posted December 28, 2010 Author Report Share Posted December 28, 2010 Man i just read through your whole thread, I am in love with your truck. It is the most intimadating datsun i hve ever seen!! I love all the pics and videos, it is really inspireing to see a truck like yours. I cant wait to see more of this build, you do great work. Thanks Man. I should be putting a nice size order to Summit for the rest of my Gauges/Wideband stuff, and my Hood should be done soon.Dave Takes So Dam LONG!! I just have alot of small things to do now. I drove it down my street today and she drove nice! Quote Link to comment
lynchfourtwenty Posted December 28, 2010 Report Share Posted December 28, 2010 look into the 14point7 widebands and the zetronix widebands, both are good and inexpensive.. Quote Link to comment
sycloned916 Posted December 29, 2010 Author Report Share Posted December 29, 2010 look into the 14point7 widebands and the zetronix widebands, both are good and inexpensive.. I have two in mind Innovate Motorsports Wideband/Turbo Timer unit and FAST single bank Wideband. I'll check out the ones above. Quote Link to comment
67 411 Posted December 29, 2010 Report Share Posted December 29, 2010 what about using megasquirt? Quote Link to comment
lynchfourtwenty Posted December 29, 2010 Report Share Posted December 29, 2010 IMO megasquirt or any other stand alone is a bit over kill unless your shooting for over 600whp Nistune kicks ass Quote Link to comment
sycloned916 Posted December 29, 2010 Author Report Share Posted December 29, 2010 IMO megasquirt or any other stand alone is a bit over kill unless your shooting for over 600whp Nistune kicks ass Were can I get the Nistune and how does it work. I saw they have 4 different versions of it. Quote Link to comment
sycloned916 Posted December 29, 2010 Author Report Share Posted December 29, 2010 what about using megasquirt? That's what I was looking at but couldn't find it for the SR20. Quote Link to comment
lynchfourtwenty Posted December 29, 2010 Report Share Posted December 29, 2010 theres a few dealers in the us. i got mine from autovaughn, they're 560$ installed an that includes the usb consult cable and software.. it makes changing injectors sizes and mafs a simple click of the mouse.. its full real time tuning, fuel maps, timing maps and much MUCH more.. its also compatible with Most widebands, including the 14point7 and zetronix.. and best of all its still a "stock" ecu so theres no need to rewire anything.. it datalogs and map traces. also and the software is pretty easy to use.. one thing is you might need to wire up the consult port but that should be easy.. if is a s13 ecu you need a type 3 i believe Quote Link to comment
sycloned916 Posted January 26, 2011 Author Report Share Posted January 26, 2011 Been busy with other stuff but got some of my gauges here some are back ordered but should be here soon. Went to Pare Composite today and found a nice front valance I'm going to use for the 520, Dave told me it from a 510 not sure what Yr,but I can make it work. Dave is also making my carbon fiber 520 hood should be done sometime Next Year! Soon as the rest of my gauges and other stuff get here and my new windshield get installed,I can finish it up. Quote Link to comment
lynchfourtwenty Posted January 26, 2011 Report Share Posted January 26, 2011 well once again, im jealous.. good work man keep it up, looks like its another year of twiddling thumbs for me :( Quote Link to comment
sycloned916 Posted January 27, 2011 Author Report Share Posted January 27, 2011 Got my front valance mocked up,I wanted to make it fit the 520's without a IC so I can make a mold but ran into some issues with it,so I just made it fit how I wanted it. I'm going to glass the center in and get it looking real nice. Quote Link to comment
lynchfourtwenty Posted January 27, 2011 Report Share Posted January 27, 2011 i like how the pink wheels on the scooter make the truck look cooler.. heheh :P Quote Link to comment
thisismatt Posted January 27, 2011 Report Share Posted January 27, 2011 Nice. Would be cool with a top mount intercooler under the hood Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.