rollinsrods Posted November 3, 2015 Report Share Posted November 3, 2015 Just did this swap and I added 1/2" outside diameter nylon sleeves to the turnbuckle eyelets. Just drill out center for bolt and grind down to the same thickness as the eyelet. This way eliminates most of that slop between your stock bolt size and the eyelet inside diameter. Quote Link to comment
Leoh911 Posted October 9, 2016 Report Share Posted October 9, 2016 I have a few questions, I have been doing some research on here and I've seen some people use a later model Saturn alternator with an internal fan, I'm wondering if the setup is the same and the wiring as well, if there are any differences and you guys can give me a hand I'd greatly appreciate it, also does this modification cause the alternator to hit the idler arm? Thank you guys. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.