]2eDeYe Posted February 19, 2007 Report Share Posted February 19, 2007 In need (more of a want :P) of a single groove crank pulley for an L series Thanks Link to comment
jovial_cynic Posted February 19, 2007 Report Share Posted February 19, 2007 I've got a few available. You don't happen to have any stock L-series engine mounts, do you? Consider a trade? Link to comment
]2eDeYe Posted February 20, 2007 Author Report Share Posted February 20, 2007 You need the rubber or the brackets? Trades are preferable :D Link to comment
jovial_cynic Posted February 20, 2007 Report Share Posted February 20, 2007 I don't need the rubber -- just the part that bolts up to the block. Yeah -- I'd make that trade. You're up in Marysville, and I'm down in Olympia. That's a bit of a drive... but if you happen to run into Jeff, he's supposed to come down sometime soon to swap some parts with me. May we can use him for transport... Link to comment
]2eDeYe Posted February 20, 2007 Author Report Share Posted February 20, 2007 Sounds good... I'll see what he's up to Link to comment
jovial_cynic Posted February 20, 2007 Report Share Posted February 20, 2007 Cool. I've got a dual-groove available, if you wanted to run an AC pump or something. Interested? Link to comment
]2eDeYe Posted February 20, 2007 Author Report Share Posted February 20, 2007 I've got all the dual and triple crank pulleys I can handle :P One belts all I need ;) Link to comment
jovial_cynic Posted February 20, 2007 Report Share Posted February 20, 2007 Sounds good. yeah - get a hold of Jeff to see if you can convince him to make a trip down here... Link to comment
]2eDeYe Posted April 24, 2007 Author Report Share Posted April 24, 2007 So....I could still use one of these if someone has one layin around. Link to comment
71-521 Posted April 24, 2007 Report Share Posted April 24, 2007 I'll have one for you... saw tooth timing mark on the right style... Link to comment
]2eDeYe Posted April 27, 2007 Author Report Share Posted April 27, 2007 Awesome...that's worth a few bucks off those spindles :D Now just have to figure out how to make the deal :P Link to comment
Recommended Posts