d.p Posted June 22, 2018 Report Share Posted June 22, 2018 Here are my "drive a 521 through the center hole" wheels. :yawn: 2 Quote Link to comment
mrbigtanker Posted June 27, 2018 Report Share Posted June 27, 2018 It does look good. Quote Link to comment
flatcat19 Posted June 27, 2018 Report Share Posted June 27, 2018 Still needs more lower. Or bigger rubber. Quote Link to comment
d.p Posted June 27, 2018 Report Share Posted June 27, 2018 Yeah just not sure how to go lower? Saw a 521 on instagram with the same size wheels and 205/50s but they just look too tall IMHO. I can reindex another notch and get bigger blocks (3 to 4”) in the rear but not sure if that detrimental? Or can I reindex and do 720 4x4 leaf springs in the rear? Quote Link to comment
flatcat19 Posted June 28, 2018 Report Share Posted June 28, 2018 I run 195/65R15 on K5s. One notch/adjust to the front. Removed a couple leaf with 3 "blocks in the back. Rides good for what it is and there is almost no gap/rubbing. 1 Quote Link to comment
mrbigtanker Posted October 7, 2018 Report Share Posted October 7, 2018 Untitled by raymond medeiros, on Flickr Quote Link to comment
lightz Posted October 13, 2018 Report Share Posted October 13, 2018 Change wheels, runs 15x8 rally wheels 3 Quote Link to comment
mrbigtanker Posted October 15, 2018 Report Share Posted October 15, 2018 Untitled by raymond medeiros, on Flickr 2 Quote Link to comment
hosestop@msn.com Posted October 15, 2018 Report Share Posted October 15, 2018 Excuse me sir but are those 5x100 to match your rear end , also I must do the bed side skirts look so much bedder , now can you pass the mustard. 2 Quote Link to comment
mrbigtanker Posted January 15, 2019 Report Share Posted January 15, 2019 Untitled by raymond medeiros, on Flickr 4 Quote Link to comment
Rick-rat Posted January 15, 2019 Report Share Posted January 15, 2019 On 10/14/2018 at 5:08 PM, mrbigtanker said: Untitled by raymond medeiros, on Flickr Do you get a lot of tire rub with those dually's ? 1 Quote Link to comment
mrbigtanker Posted January 16, 2019 Report Share Posted January 16, 2019 23 hours ago, Rick-rat said: Do you get a lot of tire rub with those dually's ? No not much I cut the rear fenders out for clearance. 1 Quote Link to comment
BrothersGarage Posted July 29, 2019 Report Share Posted July 29, 2019 can anyone identify these? Quote Link to comment
Tucson620 Posted July 29, 2019 Report Share Posted July 29, 2019 They look like vintage Shelby Mesh mags I had for Z car. Didn't know they existed for 6 lug. But there were a lot of similar knock-offs. Pretty cool looking. https://zcarsource.com/wheel-shelby-mesh-14x7-used 2 Quote Link to comment
BrothersGarage Posted July 30, 2019 Report Share Posted July 30, 2019 (edited) 17 hours ago, Tucson620 said: They look like vintage Shelby Mesh mags I had for Z car. Didn't know they existed for 6 lug. But there were a lot of similar knock-offs. Pretty cool looking. https://zcarsource.com/wheel-shelby-mesh-14x7-used Thanks Tuscon! That set me off down the path of finding them. Shelby Mesh mags are super similar but these ended up being Appliance Mesh / Ansen Cross Wire, but I couldn't have been able to track them down without your help! Edited July 30, 2019 by BrothersGarage Quote Link to comment
G-Duax Posted August 23, 2019 Report Share Posted August 23, 2019 Just picked up these gems for my 620. 16x8, 0 offset Decem-10s. Now I can get rid of my 15x7, -15 offset Decem-10s, that wouldn't fit over my disk brake conversion, and the recently acquired 16x8, 0 offset SSR Spiel Stadt mesh, that are in need of refurbishing (that I have little time to work on). 1 Quote Link to comment
Drummerboy4as Posted February 9, 2020 Report Share Posted February 9, 2020 (edited) Truck when I got it had 14 x something slot mags Titan Off Road 17x7.5 +30 Just picked these up. American Racing Hurricanes 15x8.5. Ad says 4.25 backspace which translates to -12 offset (I think) Still trying to determine what tire size I want. I don’t really want any stretch. 225 50 15 maybe? Edited February 9, 2020 by Drummerboy4as Fixed links Quote Link to comment
Drummerboy4as Posted February 9, 2020 Report Share Posted February 9, 2020 On 8/22/2019 at 6:09 PM, G-Duax said: Now I can get rid of my 15x7, -15 offset Decem-10s, that wouldn't fit over my disk brake conversion, Which disc brake conversion did you do? Quote Link to comment
G-Duax Posted February 11, 2020 Report Share Posted February 11, 2020 On 2/9/2020 at 10:21 AM, Drummerboy4as said: Which disc brake conversion did you do? Had bought Beebani's brackets off a guy on eBay, to use Z32 NA calipers Honda Passport rotors. But all is for naught, as I was T-boned Friday, and the truck, with the 4-link/Watts link conversion, and one wheel, was totaled...... The brakes had not been installed yet, due to never having time (12 hour days suck). Make me an offer........ Quote Link to comment
Drummerboy4as Posted February 11, 2020 Report Share Posted February 11, 2020 22 minutes ago, G-Duax said: Had bought Beebani's brackets off a guy on eBay, to use Z32 NA calipers Honda Passport rotors. But all is for naught, as I was T-boned Friday, and the truck, with the 4-link/Watts link conversion, and one wheel, was totaled...... The brakes had not been installed yet, due to never having time (12 hour days suck). Make me an offer........ I already have those brakes, was just curious if your 15’s fit over them. Bummer about the truck tho Quote Link to comment
G-Duax Posted February 12, 2020 Report Share Posted February 12, 2020 They should, if they are not Decem-10s. They had the tire mound depression on the inside barrel, so I had to go 16s on them. Quote Link to comment
david lo pan Posted February 28, 2020 Report Share Posted February 28, 2020 15x10 enkei 3 Quote Link to comment
mainer311 Posted March 11, 2020 Report Share Posted March 11, 2020 Whoa, that thing is bad ass! Quote Link to comment
nismo24096 Posted March 26, 2020 Report Share Posted March 26, 2020 (edited) Enkei RT-6 20x9 with a 12 offset, custom powdercoated Satin Dark Bronze with Gold flake. Edited March 26, 2020 by nismo24096 updated image source 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.