whisper3H Posted September 13, 2009 Report Share Posted September 13, 2009 I just bought a KA24 sohc engine and 5 speed tranny to swap into my Ratsun, wondering if my NapZ motor's oil pan will fit on KA engine?? Quote Link to comment
datzenmike Posted September 13, 2009 Report Share Posted September 13, 2009 I don't think so, no. Look at the Z22 pan it is roughly rectangular with the back wider than the front. The KA is similar but the front right corner has a piece missing from it right where the oil pump is. Look at the lower right corner: http://i138.photobucket.com/albums/q251/datzenmike/L%20Z%20Heads%20and%20Motors/KA24Eblock009Large.jpg[/img]"] Quote Link to comment
whisper3H Posted September 13, 2009 Author Report Share Posted September 13, 2009 ok, thank you. i was planning on going to local auto parts store and comparing Z2.0L engine oil pan gasket to a KA24e's.... Quote Link to comment
yello620 Posted September 13, 2009 Report Share Posted September 13, 2009 ok, thank you. i was planning on going to local auto parts store and comparing Z2.0L engine oil pan gasket to a KA24e's.... you can also look at picture at rockauto.com for that kind of comparisons too.:D Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.