510love Posted August 18, 2009 Report Share Posted August 18, 2009 So i have a set of Mikuni carbs with Trumpets etc etc and im looking to sell them. They work and have no clogs or anything wrong with them at all. Its currently on my 69' 510 and i was thinking about selling them. What would be a FAIR price for them? Im not looking to rip off anyone or be ripped off and i may not even sell them i just want to know since i dont......thanks guys! here are some picss Quote Link to comment
Dime Dave Posted August 18, 2009 Report Share Posted August 18, 2009 Give us some details. Are you looking at selling just the carbs or the complete induction set-up (carbs, manifold, linkage, air horns, etc)? What sizes are the carbs, 40mm or 44mm? If you don't know the size you are going to have to measure the opening at the manifold side of the carb to be sure. (40mm is 1.57", 44mm is 1.73") 40mm carbs usually are in less demand and generally not worth as much as 44mm. Quote Link to comment
datsunfish Posted August 19, 2009 Report Share Posted August 19, 2009 Same set I have. I wouldnt sell them for less than 200 but I would ask 250-300 if known working. Thats carbs alone. 75-100 for the manifold. Go ebay for 350 minimum bid 275 and see if that goes. Quote Link to comment
hang_510 Posted August 19, 2009 Report Share Posted August 19, 2009 there is a complete set of 40's on ebay for $500. ill be asking $650 for mine. complete, ready to bolt on, w/lots of extras!!! :D assuming the FI gets installed... Quote Link to comment
ariascarlos1990 Posted August 19, 2009 Report Share Posted August 19, 2009 I have the same exact set I just bought for $100. Quote Link to comment
PEZi720 Posted August 19, 2009 Report Share Posted August 19, 2009 i have a question myself... does that manifold work for the z24 as well? if so i want them but once again i think i may miss out on them due to funds. Seems like every time someone has some for sale at a decent price i can't buy them till after they're already sold Quote Link to comment
ariascarlos1990 Posted August 19, 2009 Report Share Posted August 19, 2009 ill give you $100 for the intake if it will work for a l20. Quote Link to comment
Papi Chulo Posted August 20, 2009 Report Share Posted August 20, 2009 i have a question myself... does that manifold work for the z24 as well? Yes. Won't fit a L series head Quote Link to comment
nis720 Posted August 20, 2009 Report Share Posted August 20, 2009 Isn't there 2 types of heads for the Z series? one with round ports and one with square ports? I recall when I purchased a rebuilt Z24 they gave me a Z24 with round intake ports and the mechanical fuel pump opening. They eventually just swapped the heads (rebuilt my old one). Quote Link to comment
izzo Posted August 20, 2009 Report Share Posted August 20, 2009 itll work on my truck ill give 100 for it :D Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.