a.d._510_n_ok Posted July 6, 2009 Report Share Posted July 6, 2009 If an outer tie is marked "L" that means it is for the left side, right? It may sound like a silly question and I'm 90% sure the answer is "yes" but I want to make sure. Quote Link to comment
ggzilla Posted July 6, 2009 Report Share Posted July 6, 2009 I'm about 95% percent sure. Unless it is a taiwan repro part and the marked the threads L, in which case it might be for right side... Quote Link to comment
philcas1987 Posted July 7, 2009 Report Share Posted July 7, 2009 I recently did the front end on my 510 and the ones with r were right hand thread. The l's were left hand thread. I'm pretty shure Quote Link to comment
sdsurf Posted July 7, 2009 Report Share Posted July 7, 2009 I recently did the front end on my 510 and the ones with r were right hand thread. The l's were left hand thread. I'm pretty shure I agree, same for the ones I did... Quote Link to comment
a.d._510_n_ok Posted July 7, 2009 Author Report Share Posted July 7, 2009 hmmmmmmmmmmmm, ya'll got me wondering a now but it's head was cocked back the same way as the one that came off the left side and opposite of the right one. Quote Link to comment
a.d._510_n_ok Posted August 1, 2009 Author Report Share Posted August 1, 2009 Finished the Datsun's front end rebuild Thursday and got it aligned this morning. The redneck running the alignment machine got a glassy look in his eyes when I told him a four wheel alignment was unnecessary because it's a rear wheel drive car. I had to show him the driveshaft and rear diff before he believed me :lol:! Handles like it's on rails now!!!! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.