PtheDude Posted September 7, 2007 Report Share Posted September 7, 2007 needs to be a working set, to put into my 75. Link to comment
ggzilla Posted September 8, 2007 Report Share Posted September 8, 2007 You can get them from the Nissan dealer. Link to comment
dat521gatherer Posted September 8, 2007 Report Share Posted September 8, 2007 dont know what the dealer charges but the locksmith down the street from me charges about 25-30 to rekey a door lock and put a new face cap on it, to match my ignition switch. or they can rekey your ignition switch to match your door locks. next on my list is to have my glove box lock rekeyed. the imports were smart about this having 1 key for everything. my jetta has 1 key for the doors,ignition,trunk,glove box,fuel cap. the older american cars had a different key for each lock it seemed. Link to comment
hang_510 Posted September 9, 2007 Report Share Posted September 9, 2007 :confused: http://cgi.ebay.com/ebaymotors/80-89-NISSAN-DATSUN-PICKUP-TRUCK-IGNITION-SWITCH-1981_W0QQitemZ180156088223QQihZ008QQcategoryZ46101QQssPageNameZWDVWQQrdZ1QQcmdZViewItem Link to comment
yello620 Posted September 9, 2007 Report Share Posted September 9, 2007 Do you have the ignition and door locks already, just need them to match? When i bought my 76 620, i received only one ignition key and no door keys, so i removed all three and took them to the local locksmith and told him i wanted one key to operate all of them. Then i wanted a few spare keys. He called my an hour later, was done already. Went to pick them up and he only charged me $14. Pretty sure i got a smoking deal. Jason Link to comment
PtheDude Posted September 9, 2007 Author Report Share Posted September 9, 2007 wow, okay, I'll try that! I have keys for both, I'd pulled my door lock and he maded me a key for 35 bucks. number on the lock, reada book, made a key. I don't know if he can match them, but I will ask! Link to comment
yello620 Posted September 10, 2007 Report Share Posted September 10, 2007 A GOOD locksmith can match the IF they use the same key blanks. They might decide to give all the cylinders a different cut key. But if they already did one from the book, then they should be able install that key code in the others. Jason Link to comment
dat521gatherer Posted September 10, 2007 Report Share Posted September 10, 2007 um.. smoking deal is a understatement. Link to comment
yello620 Posted September 12, 2007 Report Share Posted September 12, 2007 Ya, he told me $14, so i threw cash out fast before he changed his mind. Jason Link to comment
hang_510 Posted September 12, 2007 Report Share Posted September 12, 2007 i used AAA to get a new key made for a ignition lock and w/ the premium service(thanx dad :D ) it was FREE! cost me $12 for the second single sided key though :mad: Link to comment
Recommended Posts