521 motor mounts

[sdsurf]

looking for pics of passenger and driver side 521 motor mounts. Anybody have some?

 

Thanks

[dat521kid]

looking for pics of passenger and driver side 521 motor mounts. Anybody have some?

 

Thanks

 

you need pics of them out of the truck?

[420n620]

first 2 pics are the drivers side..

and last 2 are passenger side..

 

if you need more or differant pic's just let me know what are looking for.

these are not for the L series engine which is prob what your looking for.

Edited May 19, 2009 by 420n620

[Pacific coast Datsun]

420n620 i believe those are J 13 motor mounts. He is looking for an L series motor mount. Mike heres a not so ok pic of my 620 DS mount...

& one of how the frame looks w/ mounts removed...

pass. side...

I hope these help.

[420n620]

yea, I just noticed he had a 72 521 in his sig, I'll go ahead and leave the pic's up just incase some one with a J series needs to see pic's. Thanks Pac

[Pacific coast Datsun]

No sweat my friend. Im almost sure the 620 & 521 motor mounts are the same though.

[420n620]

I believe your 100% right from what I have read on the forum.. :cool:

[sdsurf]

Mark,

those are the exact ones I have. I will try it out. I just don't want to hassle with lowering the engine in and the don't fit:(:(

[banzai510(hainz)]

Well I believe a 521 wants 521 mounts.

Every thing I seen above looks like 620 mounts.IM positive those are not 521 mounts!!!!!!!!!!!

 

also If putting a L20 in a 521 always use the 521 oil pan so it clears the steering linkage

[fisch]

also If putting a L20 in a 521 always use the 521 oil pan so it clears the steering linkage

 

Hey HAinz, would the same oil pan swap apply to an l18 in a 521 or just the l20?

[sdsurf]

first 2 pics are the drivers side..

and last 2 are passenger side..

 

if you need more or differant pic's just let me know what are looking for.

these are not for the L series engine which is prob what your looking for.

 

 

Thanks for the pics but I do need L-series pics

[sdsurf]

 

nohter close up of motor mount ofter powder coating did the oil pan too but didn't get a pic of it.....

 

This is a perfect passenger side shot.

I need a driver side because they are different

[jefe de jefes]

This is a perfect passenger side shot.

I need a driver side because they are different

 

I don't think any of the above shots are 521 mounts. The last pic posted is what they look like. Do you need pics of mounts installed?

I may have some extra laying around somewhere.

[420n620]

heres the drivers side of the motor mounts from a 72 521 w/ L series.

this is the passenger side from below..

I hope these help ya out, it's the best I could do from not getting greasie.

Edited May 19, 2009 by 420n620
adding photo's

[sdsurf]

Thanks to everyone for their help. I found my set off a 510 and they are the same as the 521 so now I have them painted up and ready to go...

 

The pics have been a huge help and Ratsun rocks!