Jump to content
kmc63

1968-73 fiberglass 510 parts

Recommended Posts

Do you make a rear air dam dude? To give the back a more dropped look?

Nope,but have looked into it,If I could find one people were interested in I could make it one-piece trunk lid and small dam of some kind,Im almost out of trunk lids,sold one to a member in Cali today.

Share this post


Link to post

I tried to find a example but I can't find 1

I like the looks of boxed rockers for that low look,but a rear lower spoiler,I dont know,there is probably a reason you cant find an example.....Just sayin.

Share this post


Link to post

If you could make boxed rocker.... mmmm. I'd be the first to buy them.

Im thinking it would be relatively simple to do,but I dont know if there would be a demand lots of people still run them,but metal.

Share this post


Link to post

Iknow this is gonna sound goofy, but the misubishi starion rocker is boxed, and it will bolt up to a 510s rocker.(with some holes drilled into the 510 rocker) It has the same slanted corner like a 510. the only problem is the mitsu rocker is just a little short. they are, however, metal and can be welded together to make a fairly simple plug. OP, check it out. It would be easy to do the r&d. the mitsu rockers are also bolt on! So no cutting parts out. they are easy to get in a junkyard.

Share this post


Link to post

Are you heading to Jer's get together, swapmeet in May 1st? It on here in Vancouver Wa. Are you interested in a NOS tail panel ? $600 NOS in the BOX it came in when i bought it in 1994

Share this post


Link to post

Valances trimmed 150.00$ Untrimmed raw out of mold 100.00$ plus shipping.valances004.jpgvalances001.jpgvalances004-1.jpgvalances002-1.jpg

 

 

There a chance that ANYONE knows if this would fit a 521?

Share this post


Link to post
68521.jpg Sure dont look like it to me. The 521 valance wraps into the lower fender portion and the turnsignals are boxed on all four sides where as the 510s signals are only boxed on three sides. and the rectangular openings on the front of the valances are clearly different. I dont think they are close enough for a second look. :(kevs510060.jpg

Share this post


Link to post

Thanks for checking.

 

My lower valance is toast. And im not at all against modifying something to fit if its close enough.

 

If someone does happen to have a chance to test fit or compare it to a 521 up close, id definitely like to know.

 

It would be great to buy one of these from you.

 

Great looking pieces by the way!

Share this post


Link to post

I tried emailing but I got no response. Please add me email so that my email will go through. Sales@rdtech-online.com

Share this post


Link to post

I tried emailing but I got no response. Please add me email so that my email will go through. Sales@rdtech-online.com

You've been emailed and pm'd :D

Share this post


Link to post

Ordered and received Panels...Excellent in all aspects! Helpful and friendly, quick turn around and the workmanship is spot on!!

Thanks

Share this post


Link to post

Do u have any 71 510 door panels for sale

Yes,still have them.pm me for details.

Share this post


Link to post

Do you have a front right fender for sale??

No fenders as of yet,sorry. What is posted in this thread is what I have. Im getting a lot of people asking for stuff I havent made yet. Its is a slow process,especially with a more than full time job. If its not listed I dont make it,thanks for looking,and I will be as timely as I can responding to your inquiries.

Share this post


Link to post

Tail light panels 150.00$. No drip rail or trunk latch,can be added.tailpanel003-1.jpg

Share this post


Link to post

So I would like Carbon Fiber front and rear panels, no kick panels, for a 1969 510. Have any?

Share this post


Link to post

Hi Eddie,last month sounded like you were staying stock,but yes I can make them.carbonfiber001-1.jpgI made a set for my car,it was there at canby,not perfect but they look pretty good.

Share this post


Link to post

I recently bought a car with one of your front valances. And I say looks pretty fuckin good. The first part of a car to get hit. So it is nice to know we all have options.

Keep up the good work Kevin

Share this post


Link to post

×

Important Information

By using this site, you agree to our Terms of Use.