Jump to content

LTM

Members
  • Content Count

    31
  • Joined

  • Last visited

Community Reputation

29 OK

About LTM

  • Rank
    Newbie

Profile Information

  • Location
    Hawaii
  • Cars
    1983 Nissan King Cab Truck Z24
  • Interests
    I like to fix things.

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. LTM

    Z24 compression

    I checked compression on a cold engine and got 140psi in each cylinder. Does that seem to low? This is with the W04 head.
  2. LTM

    Z24 compression

    I just repaired my 1983 Z24 that has a block\head casting of (10W). Does anyone know what the normal compression is? I looked in the FSM and couldn't find any specs. on compression. I replaced the head with a W04 head and wanted to know how much difference I should expect if any.
  3. LTM

    Z24 Heads

    Thank again
  4. LTM

    Z24 Heads

    Thanks Mike It's a load off my mind.
  5. LTM

    Z24 Heads

    I measured the port on W04 head the best I could and it is smaller and rounder. The head will bolt up to my engine, I would like to know if is it OK or not to use the W04 head.
  6. LTM

    Z24 Heads

    Not sure but it looks more like the 10W head ex. port.
  7. LTM

    Z24 Heads

    I will measure the ex port. I placed the ex gasket on the left W04 and 10W ex port for comparison and the right side without the ex. gasket.
  8. LTM

    Z24 Heads

    Sorry, I sent two of the same photo. Would the W04 affect performance with smaller ex. ports? This a photo of the intake ports. W04 on the bottom.04 on the bottom.
  9. LTM

    Z24 Heads

    The top head is the 10W and W04 intake port The second photo W04oto top is W04 (gasket on both W04 and 10W left ex. port)
  10. LTM

    Z24 Heads

    Good information, thanks. Whats your take on the exhaust port?The exhaust port on the10W is more rectangle with rounded corners and the W04 has more of a round port.
  11. LTM

    Z24 Heads

    I don't know much about Z24 type heads and would like to learn. My question is the difference between a W04 head and a 10W head. How would the difference if any have an effect on the engine. I have a 10W head.
  12. The W04 head intake port looks about the same as the Z24 head but the exhaust is rounder and looks smaller on the W04. Would there be any type of change or would it be best to stay with the same type heads?
  13. LTM

    Head Bolts and Gasket

    At the beginning of this post I broke a head bolt on removal to do re torquing. Now I need to replace the broken bolt. I want to ensure I get the correct replacement bolt.
  14. LTM

    Head Bolts and Gasket

    Thanks guys my truck built was 2'83. Being that the 83 Z24 is pron to blow head gasket, I want to ensure I get the proper head bolts.
  15. LTM

    Head Bolts and Gasket

    sorry for me being ignorant, but what is meant by 11'85-07'87
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.