Jump to content

MR2PLUS

Members
  • Posts

    43
  • Joined

  • Last visited

Everything posted by MR2PLUS

  1. can you send me a lot of pics? all body, rust areas, engine bay, underside, of extra parts etc...plz 918 346 2559
  2. Time Left: 8 days and 17 hours

    • WANTED
    • USED

    LOOKING FOR A DATSUN 1200 COUPE, SEDAN 2DR OR UTE, FAIR TO GOOD CONDITION, MINUMAL RUST AND MOSTLY COMPLETE OR COMPLETE. WILLING TO SHIP IF NOT RUNNING, PRICE SUBJECT TO CONDITION BUT NOT TRYING TO STEAL YOUR TOY. SPEAKING OF TOYS, IF ANYONE HAS A TOYOTA STARLET THEY WANT TO SELL I'M YOUR GUY. LIVING IN COLORADO CURRENTLY.

    $123,456,789

    COLO SPRGS, Colorado - US

  3. Time Left: 6 days and 14 hours

    • WANTED
    • USED

    hELLO, HOPING SOME ONE HAS AN AIR PUMP LOWER PERCH OR BRACKET THAT HAS THE 3 HOLE TRIANGLE SHAPED MOUNT THAT IS CAST, AND BOLTS TO THE LOWER DRIVERS SIDE ON THE ENGINE BLOCK. I THINK IT WAS USED ON 78 OR 79 620 TRUCK, L20B. THANKS FOR YOUR HELP, NAME YOUR PRICE.CURT

    $123,456,789

    - US

  4. MR2PLUS

    GLHS's 1971 1200

    Hey, look at that...want to sell it?
  5. THANK YOU, I do not recall but I think most import cars of the 70s era did not have condenser fans, only the radiator fan. I will look into the z car set up. Thanks again.
  6. Hello Crashtd420, on your a/c install did you wire both fans to come on at engine temp or one for engine temp and one for a/c compressor on? Im running the L20b with the fan clutch /water pump and wondered ,do I need an additional a/c fan? I think a pair of 7" electrics will fit outside of the condenser but its getting tight with the aluminum rad and a condenser. What do you think?
  7. Thank you, Sir, I will view your work soon. curt
  8. thank you, I have looked at this compressor, what side of the engine did you mount it on? I have also found the sd7b10 comes with the v-belt pulley. thius compressor is quite small but works well in retro fitting. did you make a pattern to build the bracket? how close is the steering box to the mounted compressor? and how is the belt adjusted? thanks for your insight curt
  9. hey, afracer, do you want to sell the `1200?
  10. my thoughts were along the lines of using a newer sanden sd7b10 compressor but then I would have to fabricate the mounting hardware/brackets. I was hoping someone had a better solution
  11. Has anyone installed an aftermarket a/c kit into a 510?
  12. Hello William, I was told you could possibly help me. I'm looking for a dual SU intake MANIFOLD only, for the L series engines. Got any or know where to find one? Thx Curt
  13. Time Left: 1 day and 6 hours

    • WANTED
    • USED

    want to buy a dual SU intake manifold for the L series engine. dont need the carbs just the mani. thank you

    NO VALUE SPECIFIED

  14. got one on a short block, z24 4x4. make an offer, Ill figure shipping when I get your zip code
  15. thanks for the reply but I went ahead and fixed mine, turns out it was only bound up from old grease in the cluster gear where the cable goes in.
  16. Hello Gene, I saw a recent post where you stated you redo dash pads on 521 trucks, please comment on the repair and cost.

    Curt

    1. gene knight

      gene knight

      i gotta see how bad your dash is

  17. MR2PLUS

    71 Dat project

    https://imgur.com/gallery/B65yaGS
  18. DID THE GAUGES WORK? VOLTAGE REG WORK?
  19. Does the L20b have a fan on it? I just need the fan. Curt
  20. Did you settle this bed issue yet?
  21. MR2PLUS

    71 Dat project

    TJ, you have a flat bed, want to return it to a pick up bed? I have a complete bed.
  22. MR2PLUS

    71 Dat project

    If my L20 is planted by then I will give it a go.
  23. MR2PLUS

    71 Dat project

    Thanks Wayne, you’re a winner!
  24. MR2PLUS

    71 Dat project

    https://imgur.com/gallery/uKosoRq I hope this works
  25. MR2PLUS

    71 Dat project

    Wayne, they are loaded in imgur, I can copy them but they will not load up rats in. There should be 6 more pics after the left bed side/bark rotor pic. Thx for taking time on this.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.