Jump to content

Eiles

Members
  • Content Count

    31
  • Joined

  • Last visited

Everything posted by Eiles

  1. Love to see some photos of your 410 😊 One of the biggest issues with restoring/fixing these cars is trying to find parts (at affordable prices!). The searching is an adventure in itself! Ratsun has been very helpful both online and on Facebook. The 410/411 group on f/b is also a good resource. Good luck on your journey. Eiles
  2. Hi Jason i have a 1965 parts catalogue for the 411 (it's one of those half size ones that requires a magnifying glass to read the numbers πŸ™„). I can check the part numbers for the windscreens if you like? Cheers Eiles
  3. Excellent work. Great project. πŸ‘
  4. Yep, I'm always wary when handling brake parts even though items containing asbestos are not allowed to be imported into Australia. πŸ‘
  5. Thanks guys. πŸ‘
  6. Hi all Was hoping to get some info from forum members on the extent of asbestos used in the 410/411 Datsuns. Someone has previously noted that asbestos fibre is used as padding under the fuel tank straps. Any other locations that should be approached with caution? Any info appreciated. Thanks Eiles '65 411
  7. Beautiful wagon. Looks in amazing condition. 😎
  8. This is a very helpful discussion. So good to have such knowledgeable people only a keyboard away. πŸ˜„πŸ‘
  9. Magnificent little beast!
  10. The dash looks fantastic! Brilliant workπŸ‘
  11. Thanks Jesse Their prices seem quite reasonable too. Now, if only the Aussie dollar would creep up a bit 😁 Eiles
  12. Cheers guys. Thanks for the great info. Much appreciated. Eiles
  13. If all else fails I'll try making a template of the floor and cut out the pieces then have them bound. I'm not too keen on gluing, maybe Velcro or something similar might be the go. My local hardware store has marine carpet for sale which seems quite pliable. I might start there If I can find a reasonable colour match. Thank you for all your advice. 😁
  14. Thanks Mike,. I shall investigate. πŸ˜€
  15. Looks in good nick. Great find. 😁
  16. Hello all How compatible are the moulded carpet sets of a P411 and an early 510? Thinking it might be cheaper to get a moulded 510 and do some trimming rather than buy a readymade 411 set from stockinteriors and ship to Australia. Any advice greatly appreciated. Cheers Eiles
  17. Hi all I can't work out how to remove the wiper arm housing. Is there some sneaky trick or am I just missing the obvious. Any advice would be greatly appreciated. Eiles Sorted now. πŸ˜„
  18. Fantastic! Thank you muchly. Eiles
  19. Morning all Was wondering if there is a a parts book online somewhere that I can access? Cheers Eiles
  20. Eiles

    WTB p411 parts

    Time Left: 9 days and 2 hours

    • WANTED
    • NEW

    Looking for new or NOS lower left hand ball joint leaf spring bushes door seals (outer Post to Western Australia Cheers

    NO VALUE SPECIFIED

  21. Hi all Happy New Year! I'm chasing a few parts for the p411: R/h tie rod ends (inner and outer) Upper and lower ball joints Leaf Spring bushes Door outer seals Bonnet (hood) body seal Any help or advice on sourcing these parts much appreciated. Cheers Eiles
  22. Very nice collection you have there ?
Γ—
Γ—
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.