Jump to content


  • Content count

  • Joined

  • Last visited

Community Reputation

34 OK

About zachreini

  • Rank

Profile Information

  • Location
  • Cars
    '66 Datsun 520 1300, '91 Honda Acty Van
  1. Thanks! The link didn't go anywhere though, just looped back to this forum. Charlie you got the link?
  2. Anyone know a good replacement/upgraded brake master cylinder? Looking to get a dual reservoir but open to options.
  3. zachreini

    '66 520 - Mile High

    Did some work and finally finished the header. I wrapped them up cause they are really close to the fuel pump despite all my efforts. Cleaned up really nice so I got excited and mocked up the new weber carb and intake! Looks really awesome. Gotta run the fuel and vacuum line as well as the choke and throttle. Also converting it to the manual choke, so I took the carb off and found my oil cap so took some pics of that. Enjoy!
  4. zachreini

    '66 520 - Mile High

    Did some more work on the engine bay. Cleaned and scraped off a bunch of dirt and grime that caked on over 50 years. Someone painted the block electric blue, but some of the original dark teal started to show through. Committed some blasphemy and painted the valve cover yellow (i did the same thing on my honda acty) trying my hardest to make this Datto a Honda lol. Changed out the screws to some fresh shiny ones too. Ordered the MGB Header from Pierce manifolds and it would have hit the fuel pump, so I welded in some bends (very poorly) to make it fit. Took three tries but I made it work. Please excuse the shitty welds lol I'm very out of practice. Will probably get some header wrap to cover up my botched work and provide some sort of heat barrier. Enjoy!
  5. zachreini

    mgb parts on j13

    This is a longshot since this was 5 years ago, but do you have a pic of the back side of the intake on the firewall side of the carb? Just want to see how you used the vacuum port.
  6. So I got the Pierce Manifolds 32/36 DGEV Weber conversion kit and I had a quick, newbie question about the intake. There's a threaded hole on the intake manifold and I'm wondering what its for? First thought was for a bung for vacuum or something. I checked out the stock 520 intake manifold and theres a similar hole, but it just has a nut screwed into it. Any ideas? Letting my true new jack flag fly, go easy on me lol.
  7. zachreini

    Possible J13 for sale. Any interest?

    So I'm thinking about swapping my 520 with something with some more juice. Anyone interested in a stock J13 and transmission out of a '66 520? I'm located in Denver, CO. Any offers? Trying to see what its worth to get a fair price out of it. Didn't know if this was best for the classifieds or what.
  8. zachreini

    '66 520 - Mile High

    Took advantage of the momentary window of nice weather (Spring? On time? Whodathunk?) Repainted the interior. Waiting to do the doors cause they need some repair. Got the carpet in. As you can see, I had to glue in some patches to make it work. Not the cleanest, but then again this whole truck is like polishing a turd lol. DIY or die. Got finished and "covered" just in time for some spring hail/sleet. The windshield has a little leak, so I had to protect my handy work. Also installed some new mirrors and hood pins, considering doing an engine swap with my tax return. Hopefully my girlfriend doesn't kill me lol.
  9. zachreini

    '66 520 - Mile High

    Been a long time since my last post. Too cold/snowy/windy here in Denver with no garage to work on the truck. Got some stuff in the mail and was able to get some things done today. Ordered this carpet for an '80 Nissan truck, will need some modifications to fit. I'll update on how good/bad it is when I get around to install. Also, Olive the pug is testing it out. Crucial shifter knob mod. Also sanded/vacuumed/wire brushed the floor to get ready to fix the holes and seal it. Here's the finished seat after reupholstery, looks damn good! Finally, working on painting some of the dash components. Hope you all enjoy this slow progress!
  10. zachreini

    '66 520 - Mile High

    Here's a listing for that turn signal switch I cleaned. Thinking of going a different route so its up for grabs for much cheaper than other listings on eBay https://www.ebay.com/itm/152883953190?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
  11. zachreini

    Stock '66 520 Wheel Specs

    Do any of you happen to know the stock rim size/width/offset? Just trying to get numbers for future reference.
  12. zachreini

    Mile High 520

    Wouldnt mind setting it up for RHD since every time I drive something other than my van (RHD) I turn on the wipers instead of the turn signals :rofl:
  13. zachreini

    '66 520 - Mile High

    The wheel wells are square.
  14. zachreini

    '66 520 - Mile High

    What's up everyone! Been posting about my project in the 520 thread, so I thought I'd make an official project thread about it. Here's my 1966 520, located in Denver. Currently working on gutting the interior to repaint/sound deaden/bed liner everything. Lots of holes to plug up. Also notice this botched accelerator cable, anyone have any leads to a new pedal assembly and cable? My coworker is reupholstering the bench seat for me. Got this vintage patch to sew into it. A nice little detail. Thanks for checking it out, and for everyone that's helped me so far.

Important Information

By using this site, you agree to our Terms of Use.