hosestop@msn.com

I think you need a 6000$ + spoon ,to get it done ! there has been a couple cars almost done for arround same price ,just need to be finished !

3 2013-Waffles Whittier group ,had fun made waffles, hey who's kid is that in the pond, Lik

This is Vicdat (sorry to hjijack your computer, Brad), Eons ago I successfully built the old Velleman Electronic Ignition Kit. These were a fun and fast project and made a significant improvement on my '73 610 2 door (L Series) For like $20 bucks (probably more now) and a cheap enclosure it got rid of all of the little ignition gremlins I had since the dawn of time...smoothger idle, better response, run cooler...I'm not shittin' ...the set I made worked like a champ. If one of youse guys are nutz enough to investigate and make one I suugest you also get two sets of standard 4 wire trailer connectors and mount it inside up on the kickplate in a small plastic box...(William-zero might still have my old one?) Anyway it was a lot cheaper than Pertronix. This system is really primitive and utilizes the stock points instead of a reluctor so they never get hot and last daaam near forever...no condensor needed too. Keep in mind these were not specific for Datsuns or any other car...they were universal for any engine from a lawn mower to a V-12.I heard a lot of old Harley guys used themback in the day.

Diss-mounted tires clean set black on back also 300 for set .These look good on 1200s.

Hey I think you mean 7s, 8s are harder to fit right, unless 17" and notch rear control arms ect. also tire strecthing does not get rubber on the ground ,stresses side walls,I have seen alot at Hella flush events, Do you own a 510 to test? please post 8s on non flared car.I will post 8" rears on a 610- different animal ,still strecthed the tires too much.

Man wish I could of got them new for that price ,are you sure the same brand.

Have 205x50 Falkins Azenas mounted and they cleared coil over sleeves by 1/8 " with autObahns and ZX struts ,still can grind flat side if needed on coil over ,running ARE's on my car at this time with 10 front and 20 in rear , but these rims are freaks I think never seen another set like them ,came white off a G20 infinity ,I did not paint white , but like them now . Post a wagon pic please like to see it ,I am doing a ka24de Lt. Green one soon after engine bay paint (to broke to spend 200 on paint at this time ).

This started out comparing the heights of both cars , (whitey bird) looks sick slammed,his is -1" in front and -2" in rear lower and both are getting modified x members soon! have a couple spares with flame cut holes for bigger exhaust to clear and slotted , then tire wear will get better.The other oic is Shasta 2002 and is in my glass case top at shop with Jim Anderson from Sebastapol ,Nor Cal.,Has # 37 white 510.

I have my Autobahn next to Enkie and Autobahn fits a 510 with 10 offset but enkie is 0 offset so will not fit in rear well well ,anyway if anyone has 1st gen enkie like these with 10-20 offset I would trade for two for my customer ,also check out fat lip on Autobahns I like !

Shasta 2002 ?OOps black wins again ! 12-26-12

Hey Ratadat where is your location ? also have done sr 620 swap ,was tight but doable ,tried to make stock looking , too much traction loss need posi.

Hey out there ! had someone interested in rolling chassis , what was factory color and how much holiday price ,also I spoke to you about motor install ?you work at Mitsubishi ?

ZEROW came by for a drive by .

Toy truck got a weber dfav and a factory looking air filter ,with readable info,almost done time to road test.

O Offset 1st gen. Enkies 15x7 Imy customer needs to trade two for 10-15 offset same 1st gens or the whole set maybe forsale ,THEY FIT 240Z perfect ,on 610 wagon they hit fenders in front with 205x50x15s ,may put 185x50x15 and have clearance .

Hey must ask ! what stock color ? is the shell black or blue (black is rare). Also H190 is that Datsunland Mike ? back.

Had 17s now has 15x6 Toyota 4x4 steelies ,was going to paint roof black and paint blue with some stripes ,I will look for more pics .

Need to sell my shop truck with real BULLET hole in L. front fender- has much parts thrown on it ,L18 with AC needs a belt and a test ,weber sss ex. mani, new exhaust, black box dist. , int. alternator 5 spd ,new clutch& system.,lowered with short front interpart shocks Front DISC BRAKES with bees brackets and Honda rotors ,rear has load leveler springs ,and re-arced leafs with 2" blocks , Toyota seat ,new headliner,slider rear window ,custom short shifter at seat level ,Body is near rust free welded pass floor was holey , rolling on 15" Toyota 4x4 wheels ,steering wheel yomo ,Sneeds paint and interior work 2700 obo ratsun price,call (562)696-5995, Also forsale -1973 Colt ,1976 Corna wagon,1985 euro MB 190e 5spd,1977 Scout Traveler, Alleycatgarage/hosestop

Re. Hayashi and alu. Us made wheels both are 14" (had at last Eaglerock swap forsale for too much)I think Hayashi are 6" wide and others are 6.5 and tires are all 185x60x14 except US.made alu. have 195x60 on rears ,they look good with fat edge ,I will keep looking for them ,my buddy had 15" with triangles I think he sold them ! I want to see IRS under 710sss Euro model Violet!

These are 17x8s no adapters Eagle alloys billet wheels may be fs. not sure what truck we are keeping 521-620

Here is jaime's wit my der wheels (these are US made Dan Gurneys from ontario Ca.) He will be pissed I posted his car !

[ Waited like two years to get two 15x7s 10off.(3" lips )from a buddy ,every time we saw each other we would try and get the pair from the other guy ,he's going bigger I think but these fit zx struts and 205s so I scored for my wagon ,maybe?mine are the gold ones !wish I could afford tires.

That was at New Years day waffles 2011 before #46 showed up ,my son is in Nor cal Tahoe for winter his truck is non opted waiting disc brakes next , there are more pics here under six lug wheels I think and three 72 Datsuns here also ,korean bbq , or alleycatgarage on bucket ,I gotta do my wifes rear trailblazer brakes on Sunday shit at least have a lift in the rain in So Cal.

I am running 16x8 205x50 tires on my sons 521 came off a suburban cheby ,working on Sunday!

Hey I maybe there around 7:oo-7:30 but I am still comming in a 510 .