hosestop@msn.com

I think green truck was here originally , a concrete co. owned it and was on a shelf in a warehouse in Sante Fe Springs , Ca. ,I have the guys card, super condition ! he sold on Ebay.

TURBO & hardline plumbing. Again trying to hard to make a stock type install so I decided to make all lines hardlined welded with stock banjo fittings and hand bent EZ bend tubing that I sell from Brake quip,and also water input from idle control water supply 5/16 hose on opposite side of motor ,Also as is ,would and may still vibrate the hard lines to crack them so they will get some type of supports or tie together for vibration ,so I may re-do mine later on my own car ,we will see.[url=http://s1183.photobucket.com/user/Alleycatgarage/media/104_1998.jpg.html]Project 610 is getting on floor and getting out to flush engine before assembly ,was rusty in clip sat for too long in Japan junk yard.

Hey out there ! I checked cost ,it is 15.$ for two and free display parking , I may close shop and go for 4hrs , hate to show my unfinished car ! needs rubber ,headliner,dash ,needs some small paint repairs ,ect. (here we go again daily driver section)

Ok that's a great idea I would even pay a small fee ! if we can have a feed back section also , like I will never buy rubber window gaskets from a seller that his shit shrank in corners in six months and turned a grey color, but other parts of the country not as hot don't seem to have problems and it is a big waste of money for me to even think about buying his crappy products because I have to re-install for my cust.. ,how should we verbalize to save other people from crap !

Those White cars are a car club I think they were at Wekfest !

I will ask my the owner , but he had roadster wheels widened , so he paid a bunch -fronts are 7" rears 8" I think ,did I say I hate 14s not much tire selection ,federal junk 185x55 front and 195x60 rear more shit Visa tires ,all new ,these are on project sr20det 610 at this time ,he may sell but really he spent way too much is my answer , so he will want a bit..

Re. pwr steer hoses , I have a cust . that restores early bronco's with a Nissan pathfinder pumps ,both are inverted flare fittings 16 & 18 mm, the pressure is the 16mm I believe with a 5/16 metal line I make about 4" then I weld on a #6 AN to tube this allows infinite adj. and you use #6 straight swivel fittings on a hose to pump side another #6 weld on pump fitting,return is easier ,18mm also inverted fitting comes 5/16 ,I drill out to 3/8 flare tube and put hose clamp bulb on other side for clamps or I can weld another #6 and put swivel fittings ,I will try and post a pic of fittings.

Ha ha like that previous pic,car looks dk blue lt. blue]

Hi out there ! here is some stainless hoses for a cust. fuel lines for LS1 Camaro (these are crimped SS hoses -the 56 in oic is in my garage and other 620 I sold 3 trucks ago) Hi Louie from N.H. when you come out I will let you drive 510 sr20det , last time almost 10yrs ago I let you drive my rhd Silvia out for Mexican food ! with Norm and guys remember ? that car was faster than my 510 ,you need to come out and see your family.[url=http://s1183.photobucket.com/user/Alleycatgarage/media/104_1985.jpg.html]

Help me Zerow ! hey I need to eliminate all those un-used relays ,(I hate metal shelf panel and need space) which ones need a connection if I run FI ! none I think ,, think about it I will call you , or come by here .

The third one hatched today only one left , one of my friends brought to me said his turtle laid it and did not bury.

All Datsun

Spotted at the Mercedes plant !

Ok some of you saw my turtle's screwing oics , (go to other projects alleycatgarage so cal shop)Well anyway the eggs started hatching a few days ago ,so most people never see California desert turtles this small, when hatch they are folded in half and flatten out with in a couple days ,they only get like 14" across full grown, native to Mohave and Sonora deserts only ,endangered,I have adults and babies from like last five years , tried to get a teacher to take one to school and show his kids ,too much responsibility he said ,anyway here is your oics of day olds for you science minded peeps. These live to be 120 years old so I only have re-homed to people with small kids that are also science minded .[url=http://s1183.photobucket.com/user/Alleycatgarage/media/104_1978.jpg.html][url=http://s1183.photobucket.com/user/Alleycatgarage/media/104_1979.jpg.html]

Ok the 521 is really short for any grill , I tried a couple and no go ! so next maybe the top secret 1965 grill will post with duct tape ,thinking about cutting up a 610 grill using center only and 510 light surrounds .

If it matters I asked a Japan magazine guy about bullet door and he said in Japan they call it style side , a unique style for a mini truck and I am old and remember the cruisers on Whittier blvd. ( I currently have two 521s one is forsale means nothing) ,here is more Rat poison .[url=http://s1183.photobucket.com/user/Alleycatgarage/media/100_1147.jpg.html]

How about a METAL 1200 sedan grille in a 620

Hey that kid flipped me off !like the 41 ,lucky kid growing up in PNW. Rural.

1960 Dodge Dart Phoenix slant six push button auto. ,Reminds me of Christine car ,I was going to paint gold with white roof ,now my customer is moving (to UK)wants out of project as is, I may take to car swap at Pomona Ca.10-20-14 and try and move it.

Here is close up I can't believe I really like these only because they are small , old and no horid holes in the door ,and stainless , I have a bigger set on shelf here never would I drill a door.

I am thinking about leaving these ,kind of vintage look and barely screwed the doors ,anybody else have these ? will try and take a better oics. Soon will pull motor and paint engine bay Nissan Red.under Alleycatgarage

Sometimes takes one jump start to smoke diodes in alternator can act funny ,never jump without removing cable s fast to avoid electric enema. This truck is single points also not electronic .

I hear the only negs are cost and the tranny's are weaker than SR20s which are a little weak ,

Want to revive project need my shop space so next week back on 610 project .Feel free to put input .

European Auto in LA Ca. on Prarie st. 310-644-8038 best for doritos !