hosestop@msn.com

Autobahns +10mm do you have a full set ? seem to have fattest wide fitting edge getting hard to come by .

OT. regarding Z20 ,I have one here going in shop truck,has ported head with bre 538 lift cam. , it has slight piston depressions for four valve head , but was a Napsz they are close to flat tops pistons and really like long rod ,have some comp 90mm pistons that never made my Z22 that was 89mm already , so my choice z22 bored to 90mm with z20 crank and rods for more higher revs .Maybe install 48mm solex side drafts , but keep saying shop truck everybody borrows it .

Hey what size are the 521 wheels 16 or 17 " and tire size ?

Hey have a rhd rack from silvia clip . maybe you could go to engine importers in Canada and get one cheap .

I will try and show from Whittier like 50 miles each way , need to jack up car and check out rattle in R. front , I know just turn up the radio and forget about it , but I drive at 80-85 ! maybe try and make some raffle goodies if time .

Did you try trans fluid in cyls. to loosen up ! maybe rust is the culprit .

Hey Ray what offset ? 10 or 20mm ? I have a cust that was saying he has Panasports 15x7s 10 yrs in box but they are 0 offsets really not right fit for wagon .

Swapmeet was great(Thanks Jose ) , maybe 30-40 vendors - temp was great ,met Busta and Skyblue ,saw a lot of people , back to shop 12:30 for some paint work .

Brake hoses -Clutch stainless steel- check out classifieds will be at swat meet , loaded ,write for special needs- hosestop@msn.com direct please !

Yo Eddie 4:00 show up today ? it's already clearing up to be a perfect dat day here in Whittier ,my desert turtles are swimming in planter from last night .

Welcome aboard from Russia ,the bad news is there are not a lot of junked 710 Violets here and no one will cut that out probably ,to much work and no electricity at junk yard if was one there .Later Comrad from Brad .

High Road -Cults Indie1031.com hit listen live weird stuff all day .

So my h190 in my 72 521 is 4.375 and I did this once before ,I think it was a 1985 720 pumpkin I used and was 3.90s in my 521 , when do the H190 axle splines change ,also 510 wagon ,311 is different ,right ?

I have three western gold mods steel with gold centers 14x7s I think here somewhere .

Shop truck ,getting z20 5spd next!

Re. power steering hose ,pic. of one I modified ,I use weld rod that works best with map gas, silver braze ,25$ for three sticks will last a long time and once you get pre heat then you kind of remove some heat to get a 45 deg of build up ,maybe twice around weld , that is a weld on male ,. Hyd. hose 5300 psi with swivel fittings both ends ,(blue hose is a rebuilt Mercedes hose ).King cab power steering decided to use U joints both sides for street , has 720 column ,(notice 1/2 or #8 weld on on reservoir hose)not finished and sending motor swap job to someone else to finish , just not into it , depressed and money was not there ect. focus on restorations/paint and hose shop only , that's all . If you want two weld ons get a hold of me .[url=http://s1183.photobucket.com/user/Alleycatgarage/media/100_2547.jpg.html]][url=http://s1183.photobucket.com/user/Alleycatgarage/media/100_2549.jpg.html][url=http://s1183.photobucket.com/user/Alleycatgarage/media/100_2548.jpg.html]

There is a part # in dime quarterly for cable drive ,needs a modified retainer and speed is close with 15s on a 510 . later I can dig up # .

A couple more shots for rEd eye .[]

Re. Z shop dog /princess , I can see the Aussie shepherd in her often and german Shepherd also , Back to NOMAD getting done all that is left is rockers ,the rest is in 180 mostly ]

Doing bodywork on this runner then paint soon ! , Weds 6s in front and Riken 7s in rears yes different brands but its ok ,G.Fab.

Really like Coopers alu. polish .

Only the Bator formula for you !

Maybe I will see if OG Vicdat610 wants to ride out with me , I can pick him up on 60 Freeway and Azusa maybe ?Made it last month , is it like 50 miles from Whittier .

Thanks ,clear ,red .blue and charcoal or faux fiber , I almost sent you two weld on #6 an male fittings to help you make a power steer hose ,it changes rubber section to a straight hose with swivel fem. #6s , anyway I can send you a pic of next one I make here for someone .