Jump to content

carlos12245

Members
  • Content count

    30
  • Joined

  • Last visited

Community Reputation

0 Neutral

About carlos12245

  • Rank
    Newbie

Profile Information

  • Location
    farmington NM
  • Cars
    1980 280zx
  1. carlos12245

    fuel pump conversion

    would it be the red or green
  2. carlos12245

    fuel pump conversion

    thats guys really helpful and what color wire would be the ignition switch to turn on the pump because there are alot of wires to the pump
  3. carlos12245

    fuel pump conversion

    i have converted my 280zx to su carbs and my question is how do i wire in the fuel pump. i have a low psi pump and has ground and a 12v ,but i was told not to wire ot to the ignition just in case of an accident, so how can i wire it to where if that occurred how would it be wired to shut off
  4. carlos12245

    280zx su carb conversion question

    its 0-140 psi with the gauge in as well
  5. carlos12245

    280zx su carb conversion question

    ok there was one on ebay thats goes up to 140psi would that be ok and i can just adjust it done to 4psi
  6. carlos12245

    280zx su carb conversion question

    can i keep my stock pump as a temporary solution for now
  7. carlos12245

    280zx su carb conversion question

    yes sorry its my 1980 280zx with the n47/n42 , it has a electric fuel pump that i know of ,ok would the hold fpr be ok im still deciding if i should get the holly carb fuel pump or the facet electric pump just want something that would swap right into my stock fuel pump
  8. so i got my su's bolted on ,but one question i have is can i use the stock fuel pump with a bypass regulator or would i need to swap the fuel pump for a low pressure fuel pump and what is the set up for a bypass regulator
  9. carlos12245

    e88 manifold with n47 head

    ok yea mine have the ports on the manifold for the coolant to run through i think they are from an '73 but i just want to make sure itll bolt to my head
  10. carlos12245

    e88 manifold with n47 head

    just havent heard of anyone using su's on the n47 head i have a 1980 280zx
  11. carlos12245

    e88 manifold with n47 head

    the stock bolts are too big for the holes on the e88 manifold but i think ill find a bolt kit
  12. carlos12245

    e88 manifold with n47 head

    havent got the stock manifold off yet so not sure if there is anymore holes that i can bolt up to, dont really wanna drill and tap more holes i like the n47/n42 ,but my buddy is convensing me to swap
  13. carlos12245

    e88 manifold with n47 head

    i finally got my su carbs in but the manifold has 6 holes for the e88 manifold, i have an n47 head and was fuel injected but only had 4 holes, so my question is what is needed to bolt the su manifold up
  14. carlos12245

    280zx su carb write up

    ok thanks
  15. carlos12245

    280zx su carb write up

    and i have a 280zx it has coolant lines to the thermo housing and the heater hose
×

Important Information

By using this site, you agree to our Terms of Use.