Jump to content

Toybomber

New Members
  • Content count

    23
  • Joined

  • Last visited

Community Reputation

22 OK

About Toybomber

  • Rank
    Newbie
  • Birthday 06/26/1977

Profile Information

  • Gender
    Male
  • Location
    Arizona
  • Cars
    78' 620kc
  • Occupation
    Bombing toys
  1. Toybomber

    620 ka swap

    The l20 has been sold...... thank you for everyone who expressed interest with lowball offers. I now have $$$$$ to get me back on track with finishing the 620....or maybe I should buy another projects???
  2. Toybomber

    620 ka swap

    Not sure of the tapper on the center link flip... but other forums swear by them... and I can vouch..... they work well
  3. Toybomber

    620 ka swap

    Then engine mounts are original ones...... dropped 3/4" and welded back up, no issues with clearance from the top and bottom...... The pan clearance comes from the pen sitting too far back..... not much, but just enough...... its been fixed and clears lock to lock 1/4-1/2"
  4. Toybomber

    620 ka swap

    The l20b w/ 5speed and all smog equipment is for sale $$$$
  5. Toybomber

    620 ka swap

  6. Toybomber

    620 ka swap

    Pics anyone?
  7. Toybomber

    620 ka swap

    E flywheel/clutch and trans married to the engine. everything fits well........ centerline flipped..... i still had some massaging to do to the oil pan (s13 de). just got the walbro fuel pump..... and trying to figure out what headers? (any ideas or advice) Under...... i'm trying to post pic...... again....... advice?
  8. Toybomber

    620 ka swap

    Soooo...... I've been pissing my wife off something Royal... By having my "project" taking up our entire garage. Figured I would finish it sence we are listing our house (anyone wanna buy a house in Gilbert?). Back to the project, I iust fit the ka24de in lot the engine bay..... Kinda fits..... Need to massage the oil pan... My question is can I use the flywheel and clutch from the original L20? I have a clutch and flywheel from a ka24e...... This flywheel needs to be resurfaced. Or do I need a flywheel and clutch from the ka24de??..... Thanks for the advise
  9. Toybomber

    New 320 owner, 62?

    Also..... It's not that hard to replace all the lines with fresh ones........ Add about another $100-150 if you go that route
  10. Toybomber

    New 320 owner, 62?

    No need to replace the lines..... Just use the original bleeder housing at the back of the cylinder .... Lines still attached... If the "hallow bolt" or the banjo bolt threads smooth and clean..... Which it should .... Then ur golden
  11. Toybomber

    New 320 owner, 62?

    Convert it to 12v ........ Swap in a sr20 with a high capacity alt to power ur amplifiers for the booming system..... Rockfords would be a great choice.
  12. Toybomber

    New 320 owner, 62?

    Dude...... That truck is bomb...... Looks prime for a nice lime/yellow candy pant.... monster notch and 4 link the rear...and a Body drop to make it lay in the weeds..... And air on all 4 corners...post a pic of the rear end so we can see if the truck will take a roll pan..... And shave that goofy front bumper
  13. As stated in the title, I'm swapping a ka24de (s13) into my 78' 602kc. Way confused on how to run the heater hoses. The ka has 1 hose running out of the block (passengers rear) and 2 other (small 1 and big 1) coming out of the head. Next we have a small one and big one coming out of the radiator right before the pump. I've pretty much deleted the hoses running to the throttle body and most of the emissions "stuff". So heres what Im asking...... how do I make the 2 hoses from the head, the 2 hoses pre-pump and the 1 off the block all play together with the heat core in the cab??? Anyone who has done the ka-s13/620 swap.... feel free to PM me or respond with advise, encouragement and words of wisdom. Or, anyone in the East Phoenix area, there is pizza and beer for labor. As this is my first engine swap :sick:......
  14. Toybomber

    Grinding while shifting into R?

    I reversed bleed it by pushing the slave push rod in sever times while watching the bubbles in the mc res. thought I had a pedal...... But I guess not. I'll keep working at it........ But right not my focus has turned to the body...... Welding, grinding, shaving, sanding etc....etc....etc.
  15. Toybomber

    Grinding while shifting into R?

    The slave only moves about 3/4" or so
×

Important Information

By using this site, you agree to our Terms of Use.