Jump to content

zimm

New Members
  • Content Count

    15
  • Joined

  • Last visited

Posts posted by zimm


  1. Don't know what else to do to my Datsun 620  put new voltage regulator new fuel pump new wiring harness new distributor got it back in time it run great for about a week then it started missing again it has a whining in the engine could anybody give me any ideas what to do


  2. Would like to know if anyone can give me any information on my Datsun 620 pickup one minute it runs just as pretty as you please the next minute it starts missing like wildfire has anybody got any ideas what I might do. To correct the problem I have tried everything


  3. On 9/2/2019 at 10:20 PM, wayno said:

    Since you replaced the distributor I expect you changed the dist cap also, are you sure you got the firing order correct, 1, 3, 4, 2 counter clockwise, also when you put the distributor in was the rotor pointed the same direction, you need to put it at TDC with the cam lobes on number one cylinder pointed approximately 10am and 2pm, but it might be closer to 11am and 3pm, that will be the TDC you want, what ever post the rotor is pointed at on the distributor cap is where number one plug wire goes, again 1, 3, 4, 2 counter clock wise.

    I have a question about the distributor I have all the marks lined up on the crank and the cam and the oil pump  have It at top Dead center i know the little inn of the oil pump shaft has to go to the front but can't get the distributor on number one Piston the distribute  will only go one way have any ideas on what I am doing wrong.


  4. Thanks for the info i pulled the old distributor out and put a new one in the same way the old one came out but when I tried to get it to run it back fired I thought I got it out of time so I took it apart to check the timing and every thing seems to be in order just wondering what I should do next


  5. I have a 1976 Datsun king cab my truck started missing  i rebuild it about a year-and-a-half ago I put new plugs new Coil new  distributor.cant figure out what is going on with the engine now it seems like it's out of time but I tore it down and all the timing marks are lined up has anyone have any ideas what the problem might be I would appreciate some info thanks and have a blessed day

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.