Jump to content


  • Content Count

  • Joined

  • Last visited

Community Reputation

30 OK

About Hondanx250

  • Rank
    Advanced Member

Profile Information

  • Gender
    Not Telling
  • Location
  • Cars
    1979 Datsun 510 Wagon Z20S

Recent Profile Visitors

3,348 profile views
  1. Still have the z20. Sitting in the corner of the garage. I have everything to rebuild it.
  2. Update: 9/23/2018 I have been working on getting everything buttoned up. You can use a stock throttle cable. I got the wiring harness all hooked, beside CAM/AM Box. I wired up pigtails that plug into the harness, to ease my mind on cutting the harness. I have it all labeled, Just waiting to get ready to install the dash to see how i want to mount it. Currently gonna be running the old radiator with a electric fan. I will have to make a custom cold air intake pipe to get it to fit under the hood. I have been in the process of trying to figure out a custom clutch pedal. I took a Clutch Assembly from a 85 300zx from the salvage yard. It fit in the original mounting hole so i went with it. IMG_20180923_140338 by thesegamaster, on Flickr
  3. Hondanx250

    A10's U-nite !!!!

    Does anyone have a Datsun A10 parts car that was a manual? Looking for a Clutch Pedal. Or is someone has a 1980 510 Manual A10, Could you get my some reference pictures of the clutch pedal? Thanks
  4. Hondanx250

    1984 Datsun/Nissan 200SX S12 Coupe

    Has a Nice look!
  5. Hondanx250

    Syn's 1972 240z

    Nice looking z!
  6. Hondanx250

    A10's U-nite !!!!

    Take a look at http://www.car-part.com for a windshield
  7. Hondanx250

    Picking up B310 wagon parts car soon

    Post some pictures!
  8. Update 7/19/2018 Engine is installed with transmission, Went in pretty smoothly after a few adjustments. Used a A10 motor mount on passenger side and a KA Motor mount on the driver side. Engine Harness is mostly plugged in. Currently working on figure out wiring up the transmission to get reverse lights and neutral. Once i figure out that i will move on wiring to the cam/am box. Then i can get to the fun part on making some custom modifications, Installing Clutch pedal, radiator etc etc. IMG_20180701_130841 by thesegamaster, on Flickr
  9. Hondanx250

    A10's U-nite !!!!

    I have a KA Flex plate and Torque converter if needed.
  10. Hondanx250

    POST Craigslist eBay ads here...

    I need some property. https://sanantonio.craigslist.org/cto/d/datsun-pickup/6640065034.html
  11. Hondanx250

    New Wagon Owner

    Nice Wagon! Check out the A10 Page. http://community.ratsun.net/topic/50263-a10s-u-nite/
  12. Update 4/8/2018 Engine is mostly assembled with all new gaskets. Still need to do the rear main seal and thermostat. New Hoses and Vacuum lines are in place. I have ordered the rest of the items needed for the install. Hopefully the engine will be installed by the end of this month so i can get working on wiring and start re-installing the interior.
  13. Answered Solved. I just wrapping up the gasket job. Cleaned everything up the best i could without getting too extreme, Clean enough to not get your hands all greasy when you work on it. I am ordering some new vacuum lines and coolant hoses that are attached the manifold. Its coming along pretty smooth and not rushing anything. I still need to fabricate a Clutch pedal but that will come when the engine is in the car. So i can get everything lined up correctly.
  14. Hondanx250

    A10's U-nite !!!!

    Okay, Update. I see know how to make a pedal work. I can make a pedal with some fabrication! Working on a design.
  15. Hondanx250

    A10's U-nite !!!!

    So, Here is my Pedal Assembly. I am sure i can make my own pedal. Can someone help me out with reference pictures so i know where the spring goes? Auto to manual conversion. DSCN4246 by thesegamaster, on Flickr DSCN4249 by thesegamaster, on Flickr This is what the book shows me. DSCN4251 by thesegamaster, on Flickr DSCN4255 by thesegamaster, on Flickr Thanks

Important Information

By using this site, you agree to our Terms of Use.