Jump to content

grannyknot

Members
  • Content Count

    195
  • Joined

  • Last visited

Everything posted by grannyknot

  1. Randy, thanks, I had forgotten all about Muscle Car GT. 👍
  2. Thanks, "510 rotisserie" that came back with few good images, I also picked up a couple on the 510 realm.
  3. I'm not having much luck with google so was wondering if any of you guys have a pic from your 510 build. My spare tire well looks like a pinata, so many little dents that it's hard to tell exactly what the original shape is as I'm tapping them all out. Just need a reference pic to go by. Thanks, Chris
  4. That's Tiffany, she's kind of perfect. https://www.bravoerotica.com/x-art/tiffany/seaside-fanyasy/
  5. The B pillar on a coupe is about 6" farther back than it is for a 4dr and as I was laying the rocker up against the car for measurement I noticed it and thought I had screwed up some how. But as I said, I'm not using that part of the rocker anyway. The only flaw I have noticed so far is the A pillar panel doesn't really fit the front of the rocker, it should fit like a glove over the front curve but I will have to cut it in half and weld in a a small section in. It's not really a big deal as every aftermarket panel needs some massaging and all of the modified area of the A pillar pa
  6. Here is the reason, the two rockers are different, the 4 dr rocker has a stamped in recess where the base of the B pillar attaches, so the 4 dr rocker will work on a coupe but that recess will be visible unless you lay a piece of 20 ga sheet metal in the recess, weld it in and give it a skim of filler. Luckily it won't affect me as I'm only using the bottom of the rocker. The recess is hard to see so I ran a marker down the edge of both sides.
  7. The panels arrived yesterday, excellent quality, very pleased.
  8. No Vin plate? Be careful, just make sure if you buy it that you will actually be able to register it in your name and don't just take the word of the seller.
  9. I remembered where I saw the car, https://bringatrailer.com/listing/1972-datsun-510-18/ still don't know what colour it is but have a few more pics to go by. Screen-Shot-2017-09-21-at-4.53.14-PM.webp
  10. I found this pic on the internet somewhere so I can't give any credits for it but I love this colour and want to paint my 510 this shade. It doesn't look like a stock colour to me but I'm looking for any info or opinions. Thanks,
  11. Maybe you should look at it another way, you don't get something for nothing. Potential energy in equals potential power out minus all the inefficiencies, heat, wear and probably a few others. So sure it takes more gas to make more power but the bigger the engine the less efficient it becomes and no two engines are created equal. A theoretically perfect engine will produce X amount of power whilst consuming Y amount of fuel, scale up the engine by 5 times and it would produce 5 times the power at the cost of 5 times the fuel but in the real world it is all about efficiency.
  12. Yeah, I saw that, BaT is the place he should be selling it, kijiji is populated with the cheapest low ballers there are.
  13. After replacing the bearings and seals in the LSD R160 Diff I adjusted it to the best of my ability then took it up a Diff shop I have used before for them to do the pre-load and backlash adjustments. They got the wipe pattern looking great. I'm not sure why the floor pan rails aren't produced by anyone yet, they take a lot of abuse. Luckily mine were in pretty good shape with just some rust at the tail end. I got the end pieces finished today and welded up.
  14. I reached them just now and he says they are for 2 door 510"s but they can also work for a 4 door.
  15. I'm just about to order rocker panels from KF Vintage and I guess they are really busy because I can't reach them by email or phone so I thought maybe one of you guys might know. Are the outer rocker panels the same for a 2 door as a 4 door? Thanks https://kfvintagejdm.com/shop/datsun510/complete-outer-rocker-right-side-datsun-510/
  16. The brake & gas lines are done, I widened the exhaust pipe hole in the rear cross member and the Ermish Racing exhaust pipes arrived as well as the DBX Flowmaster muffler. I bought the DBX separately because I've used them before and I think they have richer sound than the Super HP that Ermish sells. I was ordering a few more rubber parts from http://www.new-datsun-parts.com/datsun-510-parts.html that I missed on my first order and notice the Roll Center Adjusters/ Bump Steer Spacers they sell, they're $35 per set! That's a 1/3rd the price of everyone else, I ordered a set
  17. It is, starting to look like a car again. That style of rear spoiler comes down and touches the paint every time you close the hatch and will eventually scuff the paint right off. 3M makes a good protective clear film that is hardly noticeable, https://www.amazon.ca/Clear-Paint-Protection-Vinyl-Film/dp/B073X7WF5J/ref=sr_1_1_sspa?crid=31R0IRCEN6OZV&dchild=1&keywords=3m+clear+protective+film&qid=1610540606&sprefix=3M+clear%2Caps%2C214&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzNEcwTks3UEVQTlNaJmVuY3J5cHRlZElkPUEwMTM4MTc4M0tUQjFTNDY1WjE3USZlbmNyeXB0ZWRBZElkP
  18. I have accomplished a few things since the last post, figured out the engine mount situation and built the trans mount, the driveline angles are done and the driveshaft shortened. I haven't actually started the engine yet but I think everything is wired correctly with regards to the Can-am box, the Datsun wiring harness was taken apart, cleaned repaired where necessary and re-wrapped. The transmission console has been roughed in, installed the doors and panels and got the gaps looking pretty good except for the hood, need to spend more time on the D/S hood gap. Picked up som
  19. I built each bumper mount pivot bracket at 10", no good, way too bottom heavy, cut them up and settled at 5.5", now it's a bit top heavy but still manageable. I think if I had settled at 6.5" it would be a neutral spin. I can raise the car up a few more inches to clear the roof if I need to but prefer to have some weight resting on the rain gutter, it makes the whole rig steadier.
  20. Thanks, that is considerably more than what I thought it would be, the measurement on the back appears to be about 9" from the top 2 bumper bolt holes to the center of the pivot tube. The front is harder to say but it looks like about 14", would you say that's about right? Also it looks as if the rain gutter of the roof just cleared the center tie holding the front and back pivots secure.
  21. I'm at the stage where I'm just about to get the 510 up on the rotisserie and wondering if someone knows where the center of gravity is on a 510, how many inches above the bumper mounting bracket holes? I'm guessing about 3-5", my rotisserie isn't adjustable so I have to make the mounting brace right the first time. Thanks
  22. Sorry about that, I didn't notice your post. Took measurements today and it was the shorter of the 2 sleeves that brought the distance to exactly 92mm.
  23. You were right, #47 black/white. All the lights and the fuel pump turn off with the key, Thanks. I was wondering if was possible to hook up the OBD 1 wires so I could read the codes?
  24. Thanks for replying Jeff, the Key Pwr is the 12ga blue/red stripe which is taking power from the black/white wire that use to go to the old coil. I just disconnected it and the ECCS and Fuel pump continue to run so I guess I should check the #46 & #109 ECU Bup next? I just edited the 1st post, all 3 circuits come on with the ignition key, turn the key off and only the RUN circuit turns off, ECCS and Fuel pump remain on until the battery is disconnected.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.