Jump to content

reza

Members
  • Posts

    285
  • Joined

  • Last visited

Everything posted by reza

  1. Time Left: 28 days and 12 hours

    • FOR SALE
    • USED

    A14 engine with 5 speed transmission. Runs drives stops. Patina monster. Exterior in good shape for age, interior is cracked from dry climate. Located in Ashland, Oregon. Clean oregon title! NEW Air filter- carburetor- Brake master- Clutch master- Tires- Battery- Ngk plugs Needs Muffler, rattles on start up.

    $2,200

    ashland, Oregon - US

  2. reza

    Powerland 2021!

    Shit or get off the pot Dan, just go to the show.
  3. I have a complete 411 SSS front assembly over here, disc brakes, etc. klamath falls, oregon. needs gone through but complete, obo.
  4. You can find master cylinder rebuild kits on ebay, also the SSS model came with front disc, maybe you can find a set of those. they are rare but parts hunting is half of the fun.
  5. Looking forward to next year buddy, thanks for the effort.
  6. NOS from yahoo japan auctions.
  7. These are unicorns anywhere pretty much, running and driving is even rarer as most haven't seen the pavement in 20-30 years. small group of enthusiasts.
  8. Looking at the age of the people running the park last year, its easy to see, they are going to be extremely cautious.
  9. I suggest going to harbor freight and buying the 20 dollar spray gun, then go to a automotive paint store and buy a quart of paint with the best color match. You want to choose this out of the industrial color card book, as it is cheapest. These paints will be a single stage and similar to what a datsun was originally painted with. Nissan didn't use a clear coat from the factory, throw some hardener and shoot it. Don't use spray cans, it'll cost the same with worse results. Tell the paint tech you have no idea what you are doing and he will spell it out for you, he is hourly and no doubt would like to flex is knowledge on the subject.
  10. reza

    411 reliability

    I will add, please, when Mike tells you not to swap to a manual trans from the BW, please listen. its never going to be a race car and the auto trans greatly improves the quality of the every day drive. I've had both BW and manual trans and I can say the BW is the way to go with this car.
  11. Still driving it weekly, takes awhile to warm up, runs great around 195-200 degrees I'll be hooking up the chokes this week, Still hunting rare parts, side lamps, radio delete, you know the really important stuff. amazing looking through my post and seeing how far this car has come.
  12. Would be killer footage to help promote future shows, I mean for ffs its 2020, every show has at least one boner flying a drone. Edit: It's not a antique engine and tractor show, Datsun dudes are slaves to tech.
  13. They designed them for aftermarket use on the Datsun 410/411, Jeco and Citizen made the factory installed clocks, the instructions show a artists interpretation of a 410/411 dash when installing. Pic snagged from "swedishcadillac"
  14. I gave it to Bananahamock and ted when they came down to buy some windshields from me. I think they were going to give it to someone who needed a spare?
  15. It's not about being cheap or expensive, my less than satisfactory review was to help other 411 owners, i would hope after reading, they wouldn't make the same mistake I did by purchasing from jc whitney. My opinion is to use your own original carpet as a templet and do it yourself because there is no other off the shelf alternative to this kit.
  16. David Jernigan came to town, you may have seen him at the last canby show, tall guy who took several thousand pictures. He took some photos of my wagon last weekend and uploaded them to his flickr page, if you want to check them out, heres the link! https://www.flickr.com/photos/djerniganphoto/with/48898393018/
  17. Yeah Mike, the problem is whitney is a commissioned dealer, they likely had a different manufacturer at the time you ordered. I won't be ordering from them again.
  18. So here's a heads up for anyone considering the JC whitney kit. DON'T BUY IT. Opened the box to find the carpet is somewhat larger and fits wonky in the car, The fronts are a typical non molded 3 piece. The fronts have piping, however the rears have NO piping and look like I grabbed a box cutter and just hacked out a pattern with it. the rears are already fraying and look completely unfinished. really disappointing, the same kit could be made half assed for 35 dollars in materials, I spent 165. and speaking with the customer reps over the internet was just as poor as the quality of this fitment. I wont support JC whitney or buy any of their products.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.