Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by Ant-dat

  1. Wagon looks differnt, Looks little narrower. Have it sorted though. Got a set of king springs from Australia. It's sitting a little higher but should be fine 🙂 somehow i managed to missplace one of the bearings from the steering box and cant get a replacement anywhere (yet) 😞
  2. I was going to change the colour to datsun orange but decided to keep original. I was going to go daft with modifying(sr20, coil overs etc) but as UK registered 510's are very rare in the UK (probably a handful left) I'm trying to keep the car original with period modification or close too.
  3. Thanks, I thought this maybe the case. It's not catching by much at the moment so i maybe able to trim back the lip to gain clearance. but best wait till i have teh springs and fitted to see as it may site a bit higher and reduce the issue even more.
  4. Replaced all the bushes and have camber and toe adjustment. Tyres are 185/60, Once i get the new king springs (30mm lowered and uprated) fitted i suspect it may just be adjustment needing done or hope 🙂 lol I have yet to find new flexi pipes but my local place is closed due to COVID-19. I still need to finish making the metal pipes but i have a little concern on the rear cylinder. I can see it slides so does the metal pipe slide with it? Tried swapping wheels round incase it's a weak tyre?
  5. Do have an issue of the rear wheels hitting the arch, but i need to wait until the new springs arrive before i do anything. Anyone else had this issue with these rims?
  6. With Lock down it gave some time to crack on with the 510. Now stuck waiting on parts coming but here are the pictures for now
  7. I'm about 45mins from Edinburgh 😉
  8. Last night i refitted the pedal box and stripped and repaired the steering box/column. Also found the brake booster i have has a damaged seal at the front so i will need to look at rebuilding that. Hopefully get the steering box refitted tonight and start working out the brake line routes.
  9. little update, Please be kind, It's the first time i have mixed paint and used a spray gun. I have to say for the first time i'm please with myself lol
  10. AS my FJ is running S14 ECU and loom with Nistune i had to add the consult port which brings many benefits.
  11. factor interior with the exception of a 180B SSS dash
  12. It really hasn't changed These were taken at the 2017 Ignition Festival Glasgow. The boot (trunk) install
  13. your spot on with the torque figures, during the day there as an issue with the machine, they gave us all a calculation on how to work out the correct values which i cant remember. The graph flow it self though that is correct, Funny thing on the day was they enclosed the air filter in cardboard and the car gained 5hp lol a little video i made I'll see if i can find the video of the actual RR day.
  14. Hopefully i can get an oil strainer to finish the engine so it can be fitted one paint is done
  15. Managed a little more work on the 510 bay Now waiting on the next dry warm day to wet sand and put it in colour :)
  16. sorry the best pictures i have at the moment new intake
  17. Here is my 1983 datsun cherry, 2 owners from new and currently with 29,000 miles
  18. thanks, I can post more pictures up and better copies of the Dyno if you like?
  19. Picture links sorted sorry had issue with my website.
  20. Ordered a pair this morning, The price I said was for 1/4 floor, The full floor for the pair cost me $146 delivered. Also trying to get 4 arch repair panels at a good price.
  21. Apologies for bringing up a year and half old thread. I'm in need of a couple of floors for a 1200 2 door and during the search I can across this thread. I was wondering if anyone has pictures of these completely fitted? I have since found VW Rabbit (or Golf as we call it) floors for little under $90 +postage a pair (complete side)which does make it a lot less than the reproduced ones in Australia.
  22. Time Left: 1 day and 8 hours

    • WANTED
    • USED

    Hi Guys It's probably a long shot but i Looking for an oil pickup or strainer for a 1971 510 new or used (good condition) Part numbers listed on the microfiche are 15050-21002 15050-A3500 thanks in advance


  • Create New...

Important Information

By using this site, you agree to our Terms of Use.